当前位置：标800招标网 > 招标公告 > 南山集团金属软管、油管等物资长期合作

南山集团金属软管、油管等物资长期合作

黑龙江 2023-03-21 17310690583
导出PDF收藏打印
您当前为:【游客状态】文中**为隐藏内容，仅对会员开放，后查看完整商机，本网为注册会员提供免费试用服务。

招标信息
  招标单位 ******总公司 项目名称 南山集团金属软管、油管等物资长期合作
  招标联系人 无 手机 无
  联系电话 无 联系邮件 zhao ****** nanshan.****.cn
  质保期 报名截止日期
  招标邮箱 zhao ****** nanshan.****.cn
竞标保证金信息
  项目保证金 5 ****** 00元 帐户名称 山东 ******限公司
  帐号 ****2142 开户行 中国银行龙口南山支行
  备注
备注：*********受公司 转账，不支持个人名义转账或银行柜台现金转账。
供应审计部招标联系人信息
  标书联系人 无 办公电话 无
  邮件 无
标书汇款相关信息
  账户名称 无 账号 无
  开户行 无 行号 无
  标书收费标准 地址、电话 无
备 ******受公司 转账，不支持个人名义转账或银行柜台现金转账。注明标书费的用途或投标项目名称。

物品名称规格型号数量单位描述
金属软管DN50*7004.00根{"规格型号":"DN50*700","计量单位":"ROO"}
金属软管DN150*10008.00根{"规格型号":"DN150*1000","公称直径":"DN150","公称压力":"1","长度":"1000","连接件形式":"法兰连接","材质":"不锈钢304","特殊要求":"两端法兰需可旋转/n内层采用304不锈钢环形无缝波纹管；法兰：***","使用寿命":"1年","计量单位":"ROO","参照标准":"GB/T 14525--2010"}
金属软管DN25*120080.00根{"规格型号":"DN25*1200","公称直径":"DN25mm","公称压力":"1.0Mpa","长度":"1200mm","连接件形式":"螺纹式","材质":"不锈钢1Cr18Ni9Ti","特殊要求":"两头均为内螺纹母头M39*2","使用寿命":"1095天","计量单位":"ROO","参照标准":"GB/T 1 ****** 3","备注":"①、验收标准：***，供货质量如若与附件要求不匹配，厂家或商家无条件进行退换货，费用由供货商全部承担。"}
金属软管DN20*65035.00根{"规格型号":"DN20*650","公称直径":"20mm","公称压力":"1.6Mpa","长度":"650mm","连接件形式":"法兰","材质":"304不锈钢","使用寿命":"≥3个月","计量单位":"ROO"}
金属软管DN65*650mm5.00根{"规格型号":"DN65*650mm","公称直径":"65mm","公称压力":"2.5Mpa","长度":"650mm","连接件形式":"法兰连接","材质":"304","特殊要求":"到货后如不符合技术要求,供应商应无条件给予更换,退货.","使用寿命":"1095天","计量单位":"ROO","参照标准":"GB/T 1 ****** 0"}
金属软管DN120*120010.00米{"规格型号":"DN120*1200","计量单位":"MTR"}
金属软管DN20*100030.00根{"规格型号":"DN20*1000","公称直径":"20mm","公称压力":"1.6Mpa","长度":"1000mm","连接件形式":"法兰","材质":"304不锈钢","使用寿命":"≥3个月","计量单位":"ROO"}
金属软管DN25*45010.00根{"规格型号":"DN25*450","公称直径":"DN25","公称压力":"2","长度":"450","连接件形式":"法兰连接","材质":"不锈钢304","特殊要求":"一端法兰需可旋转/n内层采用316L不锈钢环形无缝波纹管；法兰：***","使用寿命":"1年","计量单位":"ROO","参照标准":"GB/T 14525--2010"}
金属软管DN125*15006.00根{"规格型号":"DN125*1500","公称直径":"mm","公称压力":"Mpa","长度":"mm","使用寿命":"天","计量单位":"ROO"}
金属软管DN50*9105.00米{"规格型号":"DN50*910","计量单位":"MTR"}
金属软管DN125*16001.00根{"规格型号":"DN125*1600","公称直径":"DN125","公称压力":"1","长度":"1600","连接件形式":"法兰连接","材质":"不锈钢304","特殊要求":"两端法兰需可旋转/n内层采用304不锈钢环形无缝波纹管；法兰：***","使用寿命":"1年","计量单位":"ROO","参照标准":"GB/T 14525--2010"}
金属软管DN40*150010.00根{"规格型号":"DN40*1500","公称直径":"mm","公称压力":"Mpa","长度":"mm","使用寿命":"天","计量单位":"ROO"}
金属软管DN20*550/1Cr18Ni9Ti20.00根{"规格型号":"DN20*550/1Cr18Ni9Ti","计量单位":"ROO"}
金属软管DN15*1500mm30.00根{"规格型号":"DN15*1500mm","公称直径":"15mm","公称压力":"1.0Mpa","长度":"1500mm","连接件形式":"内丝活结连接","材质":"波纹管316L/接头316L","特殊要求":"金属软管组成:***/钢丝网套/接头(M20*1.5平头密封)","使用寿命":"≥2年天","计量单位":"ROO","参照标准":"GB/T 1 ****** 2","备注":"长度:***,长度允许偏差:±2mm"}
金属软管100*12005.00根{"规格型号":"100*1200","公称直径":"80mm","公称压力":"1.6Mpa","长度":"1200mm","连接件形式":"法兰式","材质":"304不锈钢","特殊要求":"供货时请入厂确认,具体参数以现场实际为准","使用寿命":"365天","计量单位":"ROO","参照标准":"GB/T 1 ****** 0"}
金属软管DN20*400/1Cr18Ni9Ti10.00根{"规格型号":"DN20*400/1Cr18Ni9Ti","公称直径":"20mm","公称压力":"1.6Mpa","长度":"400mm","连接件形式":"快速接头","材质":"1Cr18Ni9Ti","特殊要求":"无","使用寿命":"1460天","计量单位":"ROO","参照标准":"GB/T 3 ****** 8"}
金属软管DN2510.00根{"规格型号":"DN25","公称直径":"25mm","公称压力":"2bar","长度":"1200mm","连接件形式":"螺纹","材质":"304不锈钢","使用寿命":"1年","计量单位":"ROO"}
金属软管DN50*2.5MPa*180010.00根{"规格型号":"DN50*2.5MPa*1800","公称直径":"50mm","公称压力":"2.5Mpa","长度":"1800mm","连接件形式":"法兰连接","材质":"304","特殊要求":"到货后如不符合技术要求，供应商应无条件给予更换、退货","使用寿命":"365天","计量单位":"ROO","参照标准":"GB/T 1 ****** 0"}
金属软管DN40*24005.00根{"规格型号":"DN40*2400","公称直径":"40mm","公称压力":"1Mpa","长度":"2400mm","连接件形式":"外圆锥管螺纹连接","材质":"不锈钢波纹管以及不锈钢编制外结构","特殊要求":"螺纹规格R1~1/2","使用寿命":"730天","计量单位":"ROO","参照标准":"GB/T 1 ****** 0","备注":"如不符合技术要求供应商予以无条件退换处理。"}
金属软管63*350010.00根{"输送介质":"天然气","规格":"63*3500","材质":"304不锈钢","连接方式":"一端为活动法兰，另一端为固定法兰","被覆层材质":"不锈钢","计量单位":"ROO"}
金属软管113*4005.00根{"输送介质":"天然气","规格":"113*400","材质":"304不锈钢","连接方式":"法兰","计量单位":"ROO"}
金属软管35*15015.00根{"输送介质":"天然气","规格":"35*150","材质":"304不锈钢","连接方式":"平接头，1-1/2，11牙","被覆层材质":"不锈钢","计量单位":"ROO"}
金属软管30*110010.00根{"输送介质":"天然气","规格":"30*1100","材质":"304不锈钢","连接方式":"C型喇叭口形式，美制1-1/16，12牙","被覆层材质":"不锈钢","计量单位":"ROO"}
金属软管76*2505.00根{"输送介质":"天然气","规格":"76*250","材质":"304不锈钢","连接方式":"外螺纹","计量单位":"ROO"}
金属软管60*2005.00根{"输送介质":"天然气","规格":"60*200","材质":"304不锈钢","连接方式":"焊接","计量单位":"ROO"}
金属软管180*40005.00根{"输送介质":"天然气","规格":"180*4000","材质":"304不锈钢","连接方式":"一端为活动法兰，另一端为固定法兰","被覆层材质":"不锈钢","计量单位":"ROO"}
金属软管110*38005.00根{"输送介质":"天然气","规格":"110*3800","材质":"304不锈钢","连接方式":"一端为活动法兰，另一端为固定法兰","被覆层材质":"不锈钢","计量单位":"ROO"}
金属软管90*3002.00根{"输送介质":"天然气","规格":"90*300","材质":"304不锈钢","连接方式":"法兰","计量单位":"ROO"}
金属软管74*2002.00根{"输送介质":"天然气","规格":"74*200","材质":"304不锈钢","连接方式":"焊接","计量单位":"ROO"}
金属软管48*2002.00根{"输送介质":"天然气","规格":"48*200","材质":"304不锈钢","连接方式":"焊接","计量单位":"ROO"}
金属软管DN20*1200170.00米{"规格型号":"DN20*1200","公称直径":"20mm","公称压力":"1.0Mpa","长度":"1200mm","连接件形式":"两端C型接口，螺帽螺纹M27*1.5","材质":"管体及网套材质304不锈钢","特殊要求":"两端C型接口","使用寿命":"≥180天","计量单位":"MTR","参照标准":"GB/T 1 ****** 0","备注":"两端C型接口螺帽螺纹M27*1.5，如到货质量与技术要求不符，退货或换货处理，退换货产生的费用，由供货方承担"}
金属软管DN25*45008.00根{"规格型号":"DN25*4500","公称直径":"25mm","公称压力":"1.6Mpa","长度":"4500mm","连接件形式":"螺纹连接","材质":"304","特殊要求":"到货后不符合技术要求，供应商应无条件更换、退货。","使用寿命":"365天","计量单位":"ROO","参照标准":"GB/T 3 ****** 8"}
金属软管25*2503.00根{"规格型号":"25*250","公称直径":"25mm","公称压力":"1.6Mpa","长度":"250mm","连接件形式":"螺纹连接","材质":"304","特殊要求":"到货后如不符合技术要求，供应商应无条件给予更换、退货。","使用寿命":"365天","计量单位":"ROO","参照标准":"GB/T 3 ****** 8"}
金属软管DN20*2.5MPa2.00根{"规格型号":"DN20*2.5MPa","公称直径":"20mm","公称压力":"2.5Mpa","长度":"800mm","连接件形式":"俩头内丝接口M30","材质":"304","特殊要求":"必须配有合格证","使用寿命":"≥365天","计量单位":"ROO","参照标准":"GB/T 1 ****** 0"}
金属软管DN18*9608.00米{"规格型号":"DN18*960","公称直径":"DN18mm","公称压力":"1.0Mpa","长度":"960mm","连接件形式":"活动接头，G3/4内螺纹连接","材质":"304不锈钢","特殊要求":"来货如与技术要求不符，供应商给予免费退换货处理。","使用寿命":"≥365天","计量单位":"MTR","参照标准":"GB/T 1 ****** 0"}
金属软管100*6006.00根{"规格型号":"100*600","公称直径":"80mm","公称压力":"1.6Mpa","长度":"600mm","连接件形式":"法兰式","材质":"304不锈钢","特殊要求":"供货时请入厂测量,具体参数以现场实际为准","使用寿命":"365天","计量单位":"ROO","参照标准":"GB/T 1 ****** 0"}
金属软管DN15*8003.00根{"规格型号":"DN15*800","公称直径":"15mm","公称压力":"1Mpa","长度":"800mm","连接件形式":"俩头内丝接口","材质":"304","特殊要求":"必须配有合格证","使用寿命":"≥365天","计量单位":"ROO","参照标准":"GB/T 1 ****** 0"}
金属软管DN80*2.5MPa*18005.00根{"规格型号":"DN80*2.5MPa*1800","公称直径":"80mm","公称压力":"2.5Mpa","长度":"1800mm","连接件形式":"法兰连接","材质":"304","特殊要求":"到货后如不符合技术要求，供应商应无条件给予更换、退货","使用寿命":"365天","计量单位":"ROO","参照标准":"GB/T 1 ****** 0"}
金属软管Φ30*55/1Cr18Ni9Ti9.00根{"规格型号":"Φ30*55/1Cr18Ni9Ti","公称直径":"20mm","公称压力":"2.5Mpa","长度":"500mm","连接件形式":"内丝活接","材质":"1Cr18Ni9Ti","特殊要求":"必须配有合格证","使用寿命":"≥365天","计量单位":"ROO","参照标准":"GB/T ****** 5"}
金属软管DN10*35003.00根{"规格型号":"DN10*3500","公称直径":"10mm","公称压力":"1.6Mpa","长度":"3500mm","连接件形式":"螺纹连接","材质":"304","特殊要求":"到货后不符合技术要求，供应商应无条件更换、退货。","使用寿命":"365天","计量单位":"ROO","参照标准":"GB/T 3 ****** 8"}
金属软管DN40*2.5MPa*18003.00根{"规格型号":"DN40*2.5MPa*1800","公称直径":"40mm","公称压力":"2.5Mpa","长度":"1800mm","连接件形式":"双法兰连接","材质":"304","特殊要求":"到货后如不符合技术要求，供应商应无条件给予更换、退货","使用寿命":"365天","计量单位":"ROO","参照标准":"GB/T 1 ****** 0"}
金属软管DN100*2.5MPa*18005.00根{"规格型号":"DN100*2.5MPa*1800","公称直径":"100mm","公称压力":"2.5Mpa","长度":"1800mm","连接件形式":"双法兰连接","材质":"304","特殊要求":"到货后如不符合技术要求，供应商应无条件给予更换、退货","使用寿命":"365天","计量单位":"ROO","参照标准":"GB/T 1 ****** 0"}
金属软管DN150*20006.00根{"规格型号":"DN150*2000","公称直径":"150mm","公称压力":"1Mpa","长度":"2000mm","连接件形式":"法兰连接","材质":"不锈钢波纹管,外部钢丝编织网,法兰盘为碳钢","特殊要求":"法兰一端固定一端可转动,法兰固定孔;23mm,孔距240mm","使用寿命":"365天","计量单位":"ROO","参照标准":"GB/T 1 ****** 0","备注":"到货验收标准:***.包装完好,内部备件无破碎、损坏.2.型号,参数,等必须符合技术要求.3.升级型号的或替代型号的备件应带有升级或替代证明.4.若不符合技术要求或出现质量问题,则退换货,产生的费用由供货方承担."}
金属软管DN30*2100mm10.00根{"规格型号":"DN30*2100mm","公称直径":"30mm","公称压力":"6.4Mpa","长度":"2100mm","连接件形式":"丝扣连接","材质":"不锈钢","特殊要求":"两端接头为球面接头,接头M30*1.5","使用寿命":"730天","计量单位":"ROO","参照标准":"SH/T ****** 7"}
金属软管DN20*2100mm6.00根{"规格型号":"DN20*2100mm","公称直径":"20mm","公称压力":"6.4Mpa","长度":"2100mm","连接件形式":"丝扣连接","材质":"不锈钢316L","特殊要求":"两端为球面接头,接头为M30*1.5,耐高温,高压","使用寿命":"1095天","计量单位":"ROO","参照标准":"GB/T 1 ****** 0"}
金属软管25*12008.00根{"规格型号":"25*1200","公称直径":"25mm","公称压力":"1.6Mpa","长度":"1200mm","连接件形式":"螺纹连接","材质":"304","特殊要求":"到货后不符合技术要求，供应商应无条件给予更换、退货。","使用寿命":"365天","计量单位":"ROO","参照标准":"GB/T 3 ****** 8"}
金属软管DN50*45006.00根{"规格型号":"DN50*4500","公称直径":"50mm","公称压力":"3.5Mpa","长度":"4500mm","连接件形式":"螺纹活接连接","材质":"304不锈钢","特殊要求":"无","使用寿命":"1825天","计量单位":"ROO","参照标准":"无"}
金属软管DN30*18006.00根{"规格型号":"DN30*1800","公称直径":"30mm","公称压力":"6.4Mpa","长度":"1800mm","连接件形式":"丝扣连接","材质":"304","特殊要求":"两端接头为球面接头,接头M30*1.5","使用寿命":"730天","计量单位":"ROO","参照标准":"GB/T 1 ****** 0"}
金属软管DN20*12004.00根{"规格型号":"DN20*1200","公称直径":"20mm","公称压力":"1.6Mpa","长度":"1200mm","连接件形式":"内螺纹连接","材质":"304不锈钢","特殊要求":"到货后如不符合技术要求，供应商应无条件给予更换、退货","使用寿命":"730天","计量单位":"ROO","参照标准":"GB/T 3 ****** 8"}
金属软管DN100*6007.00根{"输送介质":"天然气","规格":"DN100*600","材质":"外表为316L不锈钢丝","连接方式":"法兰","被覆层材质":"316L不锈钢丝","计量单位":"ROO"}
金属软管DN100*12006.00根{"输送介质":"天然气","规格":"DN100*1200","材质":"外表为316L不锈钢丝","连接方式":"法兰","被覆层材质":"316L不锈钢丝","计量单位":"ROO"}
金属软管DN80*12006.00根{"输送介质":"天然气","规格":"DN80*1200","材质":"外表为316L不锈钢丝","连接方式":"法兰","被覆层材质":"316L不锈钢丝","计量单位":"ROO"}
包塑金属软管Φ40mm50.00米{"规格型号":"Φ40mm","公称直径":"40mmmm","长度":"m","材质":"表面采用PVC材料，且PVC塑料中添加了防火阻燃剂","特殊要求":"外径及允许偏差 (mm)46.6±0.5；/n内径mm：***.5mm±0.5； /n弯曲半径：***±10%/n绝缘层厚度：≥0.5mm/n产品颜色：***、灰色/n工作温度：-20℃～+120℃","使用寿命":"≥3年","计量单位":"MTR"}
包塑金属软管DN16 ****** 00米{"规格型号":"DN16","公称直径":"16mm","长度":"m","材质":"内层）采用镀锌钢带及特殊绝缘处理；/n(外层)采用PVC原料(抗紫外线、防老化）","特殊要求":"外径及允许偏差 (mm)18±0.5/n内径mm：***±0.5； /n弯曲半径：***±10%/n包塑层厚度：≥0.3mm","使用寿命":"≥1年","计量单位":"MTR"}
包塑金属软管DN80120.00米{"规格型号":"DN80","公称直径":"80mm","长度":"m","材质":"（内层）采用镀锌钢带及特殊绝缘处理；/n(外层)采用PVC原料(抗紫外线、防老化）","特殊要求":"外径及允许偏差 (mm)85.5±0.5；/n内径mm：***±0.5； /n弯曲半径：***±10%/n包塑层厚度：≥0.5mm","使用寿命":"≥1年","计量单位":"MTR"}
不锈钢金属软管DN51*3000mm5.00根{"规格型号":"DN51*3000mm","公称直径":"51mm","公称压力":"1.6Mpa","长度":"3000mm","连接件形式":"两头平头内丝","材质":"接头材质:***;内部材质:***;外部材质:***","特殊要求":"接头规格:***/"","使用寿命":"365天","计量单位":"ROO","参照标准":"GB/T 1 ****** 0","备注":"到货验收:***,若到货不符合技术要求供应商应无偿进行退货或者换货,一切损失有供应商承担."}
不锈钢金属软管DN38*2500mm20.00根{"规格型号":"DN38*2500mm","公称直径":"mm","公称压力":"Mpa","长度":"2500mm","连接件形式":"两头平头","材质":"接头材质：***；内部材质：***；外部材质：***","使用寿命":"大于365天","计量单位":"ROO"}
不锈钢金属软管DN20*5000mm5.00根{"规格型号":"DN20*5000mm","公称直径":"20mm","公称压力":"1.6Mpa","长度":"5000mm","连接件形式":"两头外丝","材质":"接头材质:***;内部材质:***;外部材质:***","特殊要求":"一头3/4/"外丝,一头1/"外丝","使用寿命":"365天","计量单位":"ROO","参照标准":"GB/T 1 ****** 0","备注":"到货验收:***,若到货不符合技术要求供应商应无偿进行退货或者换货,一切损失有供应商承担."}
不锈钢金属软管DN505.00根{"规格型号":"DN50","公称直径":"50mm","公称压力":"1.6Mpa","长度":"5000mm","连接件形式":"法兰连接","材质":"304不锈钢","特殊要求":"一端为平焊法兰，一端为活套法兰","使用寿命":"2920天","计量单位":"ROO","参照标准":"GB/T 1 ****** 0、GB/T ****** 0"}
不锈钢金属软管DN325.00根{"规格型号":"DN32","公称直径":"32mm","公称压力":"1.6Mpa","长度":"500mm","连接件形式":"法兰连接","材质":"304不锈钢","特殊要求":"一端为平焊法兰，一端为活套法兰","使用寿命":"2920天","计量单位":"ROO","参照标准":"GB/T 1 ****** 0、GB/T ****** 0"}
PU管TU0805C-201.00盘{"型号":"TU0805C-20","材质":"聚酯型PU管","接头尺寸":"外径8mm，内径5mm","长度":"20米/盘","压力":"1MPa","使用寿命":"80天"}
PU管TU0604C-1008.00盘{"型号":"TU0604C-100","材质":"聚酯型PU管","接头尺寸":"外径6mm,内径4mm","长度":"20米/盘","压力":"1MPa","使用寿命":"80天"}
胶管4SHA25*6500+FPM2.00根{"型号":"4SHA25*6500+FPM","材质":"四层钢丝橡胶软管","接头材质":"碳钢","接头尺寸":"M42*2","接头形式":"24°锥密封,两头直","国产/进口":"国产","使用寿命":"365天","特殊要求":"由于长浸泡轧制油,要求胶管和接头密封有很好的轧制油腐蚀性和阻燃性"}
胶管4SHA25*12002.00根{"型号":"4SHA25*1200","材质":"四层钢丝缠绕的橡胶软管","接头材质":"碳钢","接头尺寸":"M42*2","接头形式":"24°锥密封,两头直","国产/进口":"国产","使用寿命":"365天","特殊要求":"由于长期浸泡轧制油,要求胶管和接头密封有很好的轧制油腐蚀性和阻燃性"}
油管DN38*35007.00根{"型号":"DN38*3500","图号":"无","材质":"耐油橡胶,高弹性、高强度镀锌金属丝","接头材质":"无","接头尺寸":"无","接头形式":"无","长度":"3500mm","压力":"10bar","所属设备名称":"板式过滤器","设备型号":"无","设备生产厂家":"西马克","国产/进口":"国产","使用寿命":"180天","特殊要求":"所用材质必须具有良好的耐轧制油性和延展性,设计制作需考虑使用时存在一定的脉冲","参照标准":"GB/T 1 ****** 3","备注":"结构形式:***,中间单根螺旋金属丝.验收要求:***.退换货处理,所产生的的费用由供货方承担."}
高压软管GHG1530.00根{"规格型号":"GHG15","公称直径":"20mm","公称压力":"15Mpa","长度":"450mm","连接件形式":"螺纹活接连接","材质":"304不锈钢","特殊要求":"一头连接螺纹M24*1.5,另一头连接螺纹M22*1.5","使用寿命":"365天","计量单位":"ROO","参照标准":"GB/T 1 ****** 2"}
高压软管2SP*19*40002.00根{"型号":"2SP*19*4000","材质":"丁腈橡胶+二层钢丝缠绕","接头材质":"Q235","接头尺寸":"M30*1.5","接头形式":"螺纹","长度":"4000mm","压力":"21.5Mpa","国产/进口":"国产","使用寿命":"365天","特殊要求":"两端均为平口，一直一弯","参照标准":"JB/T ****** 7"}
高压软管4SP*32*30002.00根{"型号":"4SP*32*3000","材质":"丁腈橡胶+四层钢丝缠绕","接头材质":"Q235","接头形式":"法兰","长度":"3000mm","压力":"24Mpa","国产/进口":"国产","使用寿命":"365天","特殊要求":"两直头 法兰式：***.5±0.3mm，压口高度12.6±0.2mm","参照标准":"JB/T ****** 7"}
高压软管2SP*40*11902.00根{"型号":"2SP*40*1190","材质":"丁腈橡胶+二层钢丝缠绕","接头材质":"Q235","接头尺寸":"M52*2","接头形式":"螺纹","长度":"1190mm","压力":"11Mpa","国产/进口":"国产","使用寿命":"365天","特殊要求":"两直头，两端均为锥口，锥口直径：***","参照标准":"JB/T ****** 7"}
高压软管19*4*1400*164.00根{"型号":"19*4*1400*16","图号":"无","材质":"丁晴橡胶+钢丝","接头材质":"碳钢","接头尺寸":"G3/4","接头形式":"两端圆头","长度":"1400mm","压力":"30Mpa","所属设备名称":"铸造机","设备型号":"800S","设备生产厂家":"瓦格斯塔夫","国产/进口":"国产","使用寿命":"360天","特殊要求":"耐温80℃","参照标准":"GB/T 1 ****** 3","备注":"公称通径19mm;工作介质:***;接口形式：***,螺母尺寸G3/4;材质:***:***,中间4层高强钢丝缠绕;外胶层:***;验收标准:***,与技术要求不相符必须进行退换货.费用由供货方承担."}
高压软管2*19*30002.00根{"型号":"2*19*3000","图号":"无","材质":"丁晴橡胶+二层钢丝缠绕","接头材质":"Q235碳钢","接头尺寸":"M30*1.5","接头形式":"螺纹连接","长度":"3000","压力":"21.5MPa","所属设备名称":"DOS线","设备型号":"****","设备生产厂家":"北京机械工业自动化研究所","国产/进口":"国产","使用寿命":"365天","特殊要求":"一90°弯头、一直头，两接头为平头，通经：Φ19","参照标准":"GB/T ****** 1","备注":"工作介质:***.到货附带出厂合格证明及试压说明.包装完好,内部备件无磕碰,软管胶皮无破损,若备件不符合技术要求或出现质量问题,厂家应及时给予退换货,由此产生的费用由供货方承担."}
高压软管51*3*29402.00根{"型号":"51*3*2940","材质":"胶管管材:***,外胶层:***,","接头材质":"镀锌碳钢","接头尺寸":"Rc2","接头形式":"两端均为C型压扩活接头","长度":"2940mm,偏差+2%","压力":"5MPa","国产/进口":"国产","使用寿命":"365天","特殊要求":"软管要求内附3层钢编,外层橡胶包覆"}
高压软管4HA12*137003.00根{"型号":"4HA12*13700","材质":"四层高抗拉钢丝编制，高度耐温、耐磨、耐臭氧的合成橡胶","接头材质":"碳钢镀锌，密封氟橡胶","接头尺寸":"M24*1.5","接头形式":"24°锥密封","长度":"13700mm","压力":"415bar","所属设备名称":"单机架冷轧机","设备型号":"2800mm","设备生产厂家":"西马克"}
高压软管NB63*20004.00根{"型号":"NB63*2000","图号":"****","材质":"两层钢丝编制液压橡胶管","接头材质":"碳钢镀黄锌","接头尺寸":"G2 1/2","接头形式":"螺纹连接","长度":"2000mm","压力":"16bar","所属设备名称":"双机架冷轧机","设备型号":"2500mm","设备生产厂家":"西马克","国产/进口":"国产","使用寿命":"730天","特殊要求":"由于长期浸泡在轧制油中，要求软管和密封有良好的耐轧制油腐蚀和阻燃性；物质不满足技术要求退换货处理；退换货产生的费用由供货商承担","参照标准":"SN 544-2004"}
高压软管4SHC32*62001.00根{"型号":"4SHC32*6200","图号":"****","材质":"四层钢丝编制液压橡胶管","接头材质":"碳钢","接头尺寸":"1 1/2寸","接头形式":"SAE法兰，接头为C型","长度":"6200mm","压力":"350bar","所属设备名称":"双机架冷轧机","设备型号":"2500mm","设备生产厂家":"西马克","国产/进口":"国产","使用寿命":"730天","特殊要求":"由于长期浸泡在轧制油中，要求软管和密封有良好的耐轧制油腐蚀和阻燃性。到货验收：***；退换货产生的费用由供货商承担。","参照标准":"SN 756-2007"}
高压软管13*4*84012.00根{"型号":"13*4*840","图号":"无","材质":"丁腈橡胶,四层钢丝","接头材质":"碳钢","接头尺寸":"M30*2","接头形式":"24°锥","长度":"840mm","压力":"36MPa","所属设备名称":"涂层","设备型号":"4B850","设备生产厂家":"法塔","国产/进口":"国产","使用寿命":"365天","特殊要求":"锥口:Ф20mm,通径13mm","参照标准":"JB/T ****** 7"}
高压软管4SH32/SFS-11/4DKOS38/215010.00根{"型号":"4SH32/SFS-11/4DKOS38/2150","图号":"无","材质":"丁腈橡胶+高抗拉钢丝编制","接头材质":"碳钢","接头尺寸":"一头M52内螺纹，一头φ56法兰","接头形式":"一头24°锥，一头平口。","长度":"2100mm","压力":"350bar","所属设备名称":"推进式加热炉","设备型号":"ST0g990/283/1833Al","设备生产厂家":"艾伯纳工业炉厂","国产/进口":"国产","使用寿命":"365天","特殊要求":"无","参照标准":"GB/T 1 ****** 3","备注":"无"}
高压软管2SH-R2-1/2*38005.00根{"型号":"2SH-R2-1/2*3800","图号":"无","材质":"内管为黑色耐油橡胶,中间为2层高抗拉强度钢丝缠绕层,表皮为黑色耐油橡胶","接头材质":"镀锌碳钢","接头尺寸":"R2-1/2","接头形式":"C型扩口压扣活接头","长度":"3800mm,偏差+2%","压力":"5MPa","所属设备名称":"1+4轧机","设备型号":"2350mm","设备生产厂家":"IHI","国产/进口":"国产","使用寿命":"1095天","特殊要求":"使用介质:***,使用温度:***~70℃,要求软管内附2层高抗拉钢丝缠绕,外层橡胶包覆,","参照标准":"GB/T ****** 1","备注":"备件到货应附带出厂合格证,软管到货两端需封堵,避免杂物进入,若备件不符合技术要求或出现质量问题,厂家应及时给予退换货,由此产生的费用由供货方承担."}
高压软管2SH-R2-1/2x27006.00根{"型号":"2SH-R2-1/2x2700","图号":"无","材质":"内管为黑色耐油橡胶,中间为二层高抗拉强度钢丝缠绕层,表皮为黑色耐油橡胶","接头材质":"镀锌碳钢","接头尺寸":"R2-1/2","接头形式":"C型扩口压扣活接头","长度":"2700mm,偏差+2%","压力":"5MPa","所属设备名称":"1+4轧机","设备型号":"2350mm","设备生产厂家":"IHI","国产/进口":"国产","使用寿命":"1095天","特殊要求":"使用介质:***,使用温度:***~70℃,要求软管内附2层高抗拉钢丝缠绕,外层橡胶包覆,","参照标准":"GB/T ****** 1","备注":"备件到货应附带出厂合格证,软管到货两端需封堵,避免杂物进入,若备件不符合技术要求或出现质量问题,厂家应及时给予退换货,由此产生的费用由供货方承担."}
高压软管4SHA32*137007.00根{"型号":"4SHA32*13700","图号":"****","材质":"四层钢丝编制液压橡胶管","接头材质":"碳钢","接头尺寸":"M52*2","接头形式":"24°锥密封，接头为A型","长度":"13700mm","压力":"350bar","所属设备名称":"单机架冷轧机","设备型号":"2800mm","设备生产厂家":"西马克","国产/进口":"国产","使用寿命":"730天","特殊要求":"由于长期浸泡在轧制油中，要求软管和密封有良好的耐轧制油腐蚀和阻燃性,管接头O形圈材质为氟橡胶，O形圈规格为33*2.5，到货验收：***;退换货产生的费用由供货商承担","参照标准":"SN 756-2007","备注":"高压软管/4SHA32*13700/四层钢丝编制液压橡胶管/碳钢/M52*2/24°锥密封，接头为A型/13700mm/350bar/单机架冷轧机/2800mm/西马克/国产/730/由于长期浸泡在轧制油中，要求软管和密封有良好的耐轧制油腐蚀和阻燃性,管接头O形圈材质为氟橡胶，O形圈规格为33*2.5，到货验收：***;退换货产生的费用由供货商承担/SN 756-2007"}
高压软管4SHA25*137006.00根{"型号":"4SHA25*13700","图号":"****","材质":"四层钢丝编制液压橡胶管","接头材质":"碳钢","接头尺寸":"M42*2","接头形式":"24°锥密封，接头为A型","长度":"13700mm","压力":"350bar","所属设备名称":"单机架冷轧机","设备型号":"2800mm","设备生产厂家":"西马克","国产/进口":"国产","使用寿命":"730天","特殊要求":"由于长期浸泡在轧制油中，要求软管和密封有良好的耐轧制油腐蚀和阻燃性,管接头O形圈材质为氟橡胶，O形圈规格为25*2.5，到货验收：***;退换货产生的费用由供货商承担","参照标准":"SN 756-2007","备注":"高压软管/4SHA25*13700/四层钢丝编制液压橡胶管/碳钢/M42*2/24°锥密封，接头为A型/13700mm/350bar/单机架冷轧机/2800mm/西马克/国产/730/由于长期浸泡在轧制油中，要求软管和密封有良好的耐轧制油腐蚀和阻燃性,管接头O形圈材质为氟橡胶，O形圈规格为25*2.5，到货验收：***;退换货产生的费用由供货商承担/SN 756-2007"}
高压软管4HA12*1630010.00根{"型号":"4HA12*16300","图号":"****","材质":"四层钢丝编制液压橡胶管","接头材质":"碳钢","接头尺寸":"M24*1.5","接头形式":"24°锥密封，接头为A型","长度":"16300mm","压力":"350bar","所属设备名称":"单机架冷轧机","设备型号":"2800mm","设备生产厂家":"西马克","国产/进口":"国产","使用寿命":"730天","特殊要求":"由于长期浸泡在轧制油中，要求软管和密封有良好的耐轧制油腐蚀和阻燃性,管接头O形圈材质为氟橡胶，O形圈规格为13*2.0到货验收：***;退换货产生的费用由供货商承担","参照标准":"SN 756-2007","备注":"高压软管/4HA12*16300/四层钢丝编制液压橡胶管/碳钢/M24*1.5/24°锥密封，接头为A型/16300mm/350bar/单机架冷轧机/2800mm/西马克/国产/730/由于长期浸泡在轧制油中，要求软管和密封有良好的耐轧制油腐蚀和阻燃性,管接头O形圈材质为氟橡胶，O形圈规格为13*2.0到货验收：***;退换货产生的费用由供货商承担/SN 756-2007"}
高压软管4SHA32*163006.00根{"型号":"4SHA32*16300","图号":"****","材质":"四层钢丝编制液压橡胶管","接头材质":"碳钢","接头尺寸":"M52*2","接头形式":"24°锥密封，接头为A型","长度":"16300mm","压力":"350bar","所属设备名称":"单机架冷轧机","设备型号":"2800mm","设备生产厂家":"西马克","国产/进口":"国产","使用寿命":"730天","特殊要求":"由于长期浸泡在轧制油中，要求软管和密封有良好的耐轧制油腐蚀和阻燃性,管接头O形圈材质为氟橡胶，O形圈规格为33*2.5，到货验收：***;退换货产生的费用由供货商承担","参照标准":"SN 756-2007","备注":"高压软管/4SHA32*16300/四层钢丝编制液压橡胶管/碳钢/M52*2/24°锥密封，接头为A型/16300mm/350bar/单机架冷轧机/2800mm/西马克/国产/730/由于长期浸泡在轧制油中，要求软管和密封有良好的耐轧制油腐蚀和阻燃性,管接头O形圈材质为氟橡胶，O形圈规格为33*2.5，到货验收：***;退换货产生的费用由供货商承担/SN 756-2007"}
高压软管4SHA25*163007.00根{"型号":"4SHA25*16300","图号":"****","材质":"四层钢丝编制液压橡胶管","接头材质":"碳钢","接头尺寸":"M42*2","接头形式":"24°锥密封，接头为A型","长度":"16300mm","压力":"350bar","所属设备名称":"单机架冷轧机","设备型号":"2800mm","设备生产厂家":"西马克","国产/进口":"国产","使用寿命":"730天","特殊要求":"由于长期浸泡在轧制油中，要求软管和密封有良好的耐轧制油腐蚀和阻燃性,管接头O形圈材质为氟橡胶，O形圈规格为25*2.5，到货验收：***;退换货产生的费用由供货商承担","参照标准":"SN 756-2007","备注":"高压软管/4SHA25*16300/四层钢丝编制液压橡胶管/碳钢/M42*2/24°锥密封，接头为A型/16300mm/350bar/单机架冷轧机/2800mm/西马克/国产/730/由于长期浸泡在轧制油中，要求软管和密封有良好的耐轧制油腐蚀和阻燃性,管接头O形圈材质为氟橡胶，O形圈规格为25*2.5，到货验收：***;退换货产生的费用由供货商承担/SN 756-2007"}
高压油管4HA12*12600/M24*1.5/350bar1.00根{"型号":"4HA12*12600/M24*1.5/350bar","图号":"无","材质":"四层钢丝编制液压橡胶管","接头材质":"碳钢","接头尺寸":"DN12","接头形式":"M24*1.5,24°锥","长度":"12.6m","压力":"350bar","所属设备名称":"1+5热粗轧机","设备型号":"HC-HB-RZJ-01","设备生产厂家":"德国西马克","国产/进口":"进口","使用寿命":"365天","特殊要求":"无","参照标准":"GB/T ****** 1","备注":"到货物资与技术要求不符时,换货处理."}
高压油管M52*2/DN32/8400mm1.00根{"型号":"M52*2/DN32/8400mm","图号":"无","材质":"合成橡胶+两层高强度钢丝层","接头材质":"碳钢","接头尺寸":"M52*2","接头形式":"两端24°锥,锥口38,通径DN32,两头直通","长度":"8400mm","压力":"36MPa","所属设备名称":"2#拉矫","设备型号":"C ****** KA67","设备生产厂家":"西门子奥钢联","国产/进口":"国产","使用寿命":"365天","特殊要求":"外层不锈钢编织钢丝耐磨层,油管自带O型圈,O型圈材质:***","参照标准":"GB/T ****** 1","备注":"到货外包装无破损,划伤,油管两端有防尘堵头,无品牌要求,到货需附带检验报告及合格证,如到货质量与技术要求不符,换货至退货处理,产生费用由供货商承担"}
高压油管M42*2/DN25/8400mm1.00根{"型号":"M42*2/DN25/8400mm","图号":"无","材质":"合成橡胶+两层高强度钢丝层","接头材质":"碳钢","接头尺寸":"M42*2","接头形式":"两端24°锥,锥口30,通径DN25,两头直通","长度":"8400mm","压力":"36MPa","所属设备名称":"2#拉矫","设备型号":"C ****** KA67","设备生产厂家":"西门子奥钢联","国产/进口":"国产","使用寿命":"365天","特殊要求":"外层不锈钢编织钢丝耐磨层,油管自带O型圈,O型圈材质:***","参照标准":"GB/T ****** 1","备注":"到货外包装无破损,划伤,油管两端有防尘堵头,无品牌要求,到货需附带检验报告及合格证,如到货质量与技术要求不符,换货至退货处理,产生费用由供货商承担"}
高压油管M30*2/DN16/8400mm2.00根{"型号":"M30*2/DN16/8400mm","图号":"无","材质":"合成橡胶+两层高强度钢丝层","接头材质":"碳钢","接头尺寸":"M30*2","接头形式":"两端24°锥,锥口20,通径DN16,两头直通","长度":"8400mm","压力":"36MPa","所属设备名称":"2#拉矫","设备型号":"C ****** KA67","设备生产厂家":"西门子奥钢联","国产/进口":"国产","使用寿命":"365天","特殊要求":"外层不锈钢编织钢丝耐磨层,油管自带O型圈,O型圈材质:***","参照标准":"GB/T ****** 1","备注":"到货外包装无破损,划伤,油管两端有防尘堵头,无品牌要求,到货需附带检验报告及合格证,如到货质量与技术要求不符,换货至退货处理,产生费用由供货商承担"}
高压油管M18*1.5/DN10/8400mm1.00根{"型号":"M18*1.5/DN10/8400mm","图号":"无","材质":"合成橡胶+两层高强度钢丝层","接头材质":"碳钢","接头尺寸":"M18*1.5","接头形式":"两端24°锥,锥口12,通径DN10,两头直通","长度":"8400mm","压力":"36MPa","所属设备名称":"2#拉矫","设备型号":"C ****** KA67","设备生产厂家":"西门子奥钢联","国产/进口":"国产","使用寿命":"365天","特殊要求":"外层不锈钢编织钢丝耐磨层,油管自带O型圈,O型圈材质:***","参照标准":"GB/T ****** 1","备注":"到货外包装无破损,划伤,油管两端有防尘堵头,无品牌要求,到货需附带检验报告及合格证,如到货质量与技术要求不符,换货至退货处理,产生费用由供货商承担"}
高压油管M18*1.5*2500/36MPa3.00根{"型号":"M18*1.5*2500/36MPa","图号":"无","材质":"由耐油（水）合成橡胶的内胶层,钢丝编织增强层.耐天候合成橡胶外胶层组成","接头材质":"碳钢","接头尺寸":"M18*1.5","接头形式":"一头90°直角接头,一头为0°直通接头","长度":"2500mm","压力":"36MPa","所属设备名称":"浇铸站","设备型号":"2100×1700","设备生产厂家":" ******限公司 ","国产/进口":"国产","使用寿命":"180天","特殊要求":"无","参照标准":"JB/T ****** 7","备注":"到货物资与技术要求不符，予以退换货处理"}
高压油管M42*2/DN25/7800mm5.00根{"型号":"M42*2/DN25/7800mm","图号":"无","材质":"合成橡胶+两层高强度钢丝层","接头材质":"碳钢","接头尺寸":"M42*2","接头形式":"两端24°锥,锥口30,通径DN25,两头直通","长度":"7800mm","压力":"36MPa","所属设备名称":"2#拉矫","设备型号":"C ****** KA67","设备生产厂家":"西门子奥钢联","国产/进口":"国产","使用寿命":"365天","特殊要求":"外层不锈钢编织钢丝耐磨层,油管自带O型圈,O型圈材质:***","参照标准":"GB/T ****** 1","备注":"到货外包装无破损,划伤,油管两端有防尘堵头,无品牌要求,到货需附带检验报告及合格证,如到货质量与技术要求不符,换货至退货处理,产生费用由供货商承担"}
高压油管M18*1.5/DN10/7800mm2.00根{"型号":"M18*1.5/DN10/7800mm","图号":"无","材质":"合成橡胶+两层高强度钢丝层","接头材质":"碳钢","接头尺寸":"M18*1.5","接头形式":"两端24°锥,锥口12,通径DN10,两头直通","长度":"7800mm","压力":"36MPa","所属设备名称":"2#拉矫","设备型号":"C ****** KA67","设备生产厂家":"西门子奥钢联","国产/进口":"国产","使用寿命":"365天","特殊要求":"外层不锈钢编织钢丝耐磨层,油管自带O型圈,O型圈材质:***","参照标准":"GB/T ****** 1","备注":"到货外包装无破损,划伤,油管两端有防尘堵头,无品牌要求,到货需附带检验报告及合格证,如到货质量与技术要求不符,换货至退货处理,产生费用由供货商承担"}
高压油管4SH*DN38*12005.00根{"型号":"4SH*DN38*1200","图号":"无","材质":"橡胶材质:***.增强层:***","接头材质":"45号钢","接头尺寸":"F型法兰连接,外径Φ63.5高度13","接头形式":"F型接头,一直头一135°弯头","长度":"1200mm","压力":"35Mpa","所属设备名称":"铝型材挤压机","设备型号":"明晟900吨挤压机","设备生产厂家":"明晨机电","国产/进口":"国产","使用寿命":"365天","特殊要求":"工作介质:***,4层钢丝编织胶管,抗压36Mpa,按图纸加工,附图纸","参照标准":"GB/T ****** 1","备注":"收标准:***,产品无破损,配带密封防尘罩并附带合格证明.对来货验收不符合要求的,进行更换或退货处理,退换货产生的一切费用由供货方承担."}
高压油管F5SHΦ25*15100/38.0Mpa3.00根{"型号":"F5SHΦ25*15100/38.0Mpa","图号":"无","材质":"5SH软管,内管为黑色耐油橡胶,中间为五层高抗拉强度钢丝缠绕层,表皮为黑色耐油橡胶","接头材质":"碳钢","接头尺寸":"47.6±0.25mm*9.5±0.15mm*38","接头形式":"SAE法兰胶管接头(6000系列)","长度":"15100mm","压力":"38.0mpa","所属设备名称":"10MN拉伸机","设备型号":"HC-HB-LSJ-03","设备生产厂家":"中 ******份公司 ","国产/进口":"国产","使用寿命":"365天","特殊要求":"油管自带O型圈,O型圈材质:***.适应温度-20℃~+70℃.","参照标准":"JB/T ****** 7","备注":"无品牌要求,验收标准:***;划伤;油管两端有防尘堵头,到货必须附带检验报告及合格证;管接头尺寸及管身标注压力与合格证一致.不合格处理方法:***;换货至退货处理,产生的费用由供货商承担."}
高压油管F2SHΦ25*15100/27.5Mpa4.00根{"型号":"F2SHΦ25*15100/27.5Mpa","图号":"无","材质":"2SH软管,内管为黑色耐油橡胶,中间为二层高抗拉强度钢丝缠绕层,表皮为黑色耐油橡胶.","接头材质":"碳钢","接头尺寸":"44.4±0.25mm*8±0.15mm*38","接头形式":"SAE法兰胶管接头(3000系列)","长度":"15100mm","压力":"27.5mpa","所属设备名称":"10MN拉伸机","设备型号":"HC-HB-LSJ-03","设备生产厂家":"中 ******份公司 ","国产/进口":"国产","使用寿命":"365天","特殊要求":"油管自带O型圈,O型圈材质:***.适应温度-20℃~+70℃.","参照标准":"JB/T ****** 7","备注":"无品牌要求,验收标准:***;划伤;油管两端有防尘堵头,到货必须附带检验报告及合格证;管接头尺寸及管身标注压力与合格证一致.不合格处理方法:***;换货至退货处理,产生的费用由供货商承担."}
高压油管F2SHΦ12.5*15100/34.5Mpa2.00根{"型号":"F2SHΦ12.5*15100/34.5Mpa","图号":"无","材质":"2SH软管,内管为黑色耐油橡胶,中间为二层高抗拉强度钢丝缠绕层,表皮为黑色耐油橡胶","接头材质":"碳钢","接头尺寸":"30.2±0.25mm*6.8±0.15mm*24","接头形式":"SAE法兰胶管接头(3000系列)","长度":"15100mm","压力":"34.5mpa","所属设备名称":"10MN拉伸机","设备型号":"HC-HB-LSJ-03","设备生产厂家":"中 ******份公司 ","国产/进口":"国产","使用寿命":"365天","特殊要求":"油管自带O型圈,O型圈材质:***.","参照标准":"JB/T ****** 7","备注":"无品牌要求,验收标准:***;划伤;油管两端有防尘堵头,到货必须附带检验报告及合格证;管接头尺寸及管身标注压力与合格证一致.不合格处理方法:***;换货至退货处理,产生的费用由供货商承担."}
高压油管H4SHΦ19*1600/43.0Mpa5.00根{"型号":"H4SHΦ19*1600/43.0Mpa","图号":"无","材质":"4SH软管,内管为黑色耐油橡胶,中间为四层高抗拉强度钢丝缠绕层,表皮为黑色耐油橡胶.","接头材质":"碳钢","接头尺寸":"24°/M36*2*S46","接头形式":"24°锥O型圈密封胶管接头（重型系列）270°顺时针","长度":"1600mm","压力":"43.0mpa","所属设备名称":"40MN拉伸机","设备型号":"HC-HB-LSJ-01","设备生产厂家":" ******限公司 ","国产/进口":"进口","使用寿命":"365天","特殊要求":"油管接头需要配置90°直角弯头型,且装配角度为顺时针270°.油管自带O型圈,材质丁晴橡胶.适应温度-20℃~+70℃.","参照标准":"JB/T ****** 7","备注":"无品牌要求,验收标准:***;划伤;油管两端有防尘堵头,到货必须附带检验报告及合格证;管接头尺寸及管身标注压力与合格证一致.不合格处理方法:***;换货至退货处理,产生的费用由供货商承担."}
高压油管H3SHΦ8*750/56.0Mpa6.00根{"型号":"H3SHΦ8*750/56.0Mpa","图号":"无","材质":"3SH软管,内管为黑色耐油橡胶,中间为3层高抗拉强度钢丝缠绕层,表皮为黑色耐油橡胶.","接头材质":"碳钢","接头尺寸":"24°/M16*1.5*S19","接头形式":"24°锥O型圈密封胶管接头（轻型系列）","长度":"750mm","压力":"56.0mpa","所属设备名称":"80MN拉伸机","设备型号":"HC-HB-LSJ-01","设备生产厂家":" ******限公司 ","国产/进口":"进口","使用寿命":"365天","特殊要求":"油管自带O型圈,O型圈材质:***.适应温度-20℃~+70℃.","参照标准":"JB/T ****** 7","备注":"无品牌要求,验收标准:***;划伤;油管两端有防尘堵头,到货必须附带检验报告及合格证;管接头尺寸及管身标注压力与合格证一致.不合格处理方法:***;换货至退货处理,产生的费用由供货商承担."}
高压油管4SH*DN38*160010.00根{"型号":"4SH*DN38*1600","图号":"无","材质":"橡胶材质:***.增强层:***","接头材质":"45号钢","接头尺寸":"F型法兰连接，外径Φ60.5高度12.5","接头形式":"F型接头,一直头一90°弯头","长度":"1600mm","压力":"35Mpa","所属设备名称":"铝型材挤压机","设备型号":"明晟1400吨挤压机","设备生产厂家":"明晟机电","国产/进口":"国产","使用寿命":"365天天","特殊要求":"工作介质:***,4层钢丝编织胶管,抗压35Mpa,按图纸加工,附图纸","参照标准":"GB/T ****** 1","备注":"验收标准：***，产品无破损，配带密封防尘罩并附带合格证明不合格产品处理方式：***，进行更换或退货处理，退换货产生的一切费用由供货商承担"}
液压油管4*25*22003.00根{"型号":"4*25*2200","图号":"无","材质":"胶管材质为耐油合成橡胶，四层高强钢编增强层，外部为304不锈钢钢编编制；O型圈材质为丁腈橡胶。","接头材质":"碳钢","接头尺寸":"一直头F=φ44mm圆形法兰带O型圈，一90°弯头C型连接螺母1 5/16/"*12牙","接头形式":"一F头，一C型头","长度":"2200mm","压力":"30Mpa","所属设备名称":"熔炼炉","设备型号":"75T","设备生产厂家":"布里克蒙","国产/进口":"国产","使用寿命":"365天","特殊要求":"工作介质:***","参照标准":"GB/T ****** 1","备注":"验收标准:***,必须进行退换货.费用由供货商全部承担."}
液压油管4*19*24008.00根{"型号":"4*19*2400","图号":"无","材质":"胶管材质为耐油合成橡胶，四层高强钢编增强层，外部为304不锈钢钢编编制；O型圈材质为丁腈橡胶。","接头材质":"Q235碳钢","接头尺寸":"一直头F=φ38mm圆形法兰带O型圈，一90°弯头C型连接螺母1 1/16/"*12牙","接头形式":"一F头，一C型头","长度":"2400±10mm","压力":"30Mpa","所属设备名称":"熔炼炉","设备型号":"75T","设备生产厂家":"布里克蒙","国产/进口":"国产","使用寿命":"365天","特殊要求":"工作介质:***","参照标准":"GB/T ****** 1","备注":"验收标准：***,必须进行退换货.费用由供货商全部承担."}
高压油管总成HD219*300000/AOL/AOL902.00根{"型号":"HD219*300000/AOL/AOL90","图号":"无","材质":"合成橡胶+高强度钢丝编织","接头材质":"碳钢","接头尺寸":"M26*1.5","接头形式":"24度锥管接头带O型密封圈，一头90度弯头，一头直通，扳手空间32mm","长度":"30M","压力":"25Mpa","所属设备名称":"11MN成品锯","设备型号":"11MN","设备生产厂家":"格兰克","国产/进口":"所属设备为进口，备件不指定","使用寿命":"365天","特殊要求":"无","参照标准":"GB/T ****** 1","备注":"验收：***，不符合要求的供货商给予退货或换货处理；"}
高压绝缘卡套油管M22*1.5*20008.00根{"型号":"M22*1.5*2000","材质":"内芯尼龙 增强层；纤维编织 外皮；聚氨酯（PU）","接头尺寸":"M22*1.5mm","长度":"2000mm","压力":"25-40map","所属设备名称":"多功能天车","设备型号":"16t+12.5t*2/Lk=25.4m","设备生产厂家":"大连大起集团","使用寿命":"6-12个月","特殊要求":"耐磨、耐高温、耐高温40-80℃、抗老化"}
高压绝缘油管M22*1.5*19004.00根{"型号":"M22*1.5*1900","材质":"内芯尼龙 增强层；纤维编织 外皮；聚氨酯（PU）","接头尺寸":"M22*1.5","长度":"1900mm","压力":"35Mpa","特殊要求":"接头螺纹 H型带O型圈 软管内径13mm"}
钢鞭管DN50*700mm8.00根{"规格型号":"DN50*700mm","公称直径":"DN50","公称压力":"1.6Mpa","长度":"700mm","连接件形式":"法兰连接(法兰外径155mm,眼中心距125mm)","材质":"软管为304不锈钢，法兰为碳钢Q235B","特殊要求":"一端法兰需可旋转","使用寿命":"≥180天","计量单位":"ROO","参照标准":"SH/T ****** 7","备注":"不合格品处理标准:,到货物资不符合技术要求供货厂家无条件退换货处理,所产生的一切费用由供货厂家承担"}
钢鞭管DN40*70012.00根{"规格型号":"DN40*700","公称直径":"DN40","公称压力":"1.6Mpa","长度":"700mm","连接件形式":"法兰连接(法兰外径133mm,眼中心距109mm)","材质":"软管为304不锈钢，法兰为碳钢Q235B","特殊要求":"一端法兰需可旋转","使用寿命":"180天","计量单位":"ROO","参照标准":"SH/T ****** 7","备注":"不合格品处理标准:,到货物资不符合技术要求供货厂家无条件退换货处理,所产生的一切费用由供货厂家承担"}
挠性管260-267H10.00根{"型号":"260-267H","图号":"260-267H","材质":"一层耐高温、耐腐蚀、高压橡胶软管,二层不锈钢钢丝网套,两端带不锈钢护套固定金属软管","接头材质":"304","接头尺寸":"M22*1.5","接头形式":"球面接头","长度":"700mm","压力":"≤8MPa","所属设备名称":"液压缸","设备型号":"350.5H","设备生产厂家":" ******限公司 ","国产/进口":"国产","使用寿命":"≥365天","特殊要求":"两端均为直头,耐高温、高压、耐腐蚀、耐磨","参照标准":"GB/T 1 ****** 0","备注":"来货带合格证,若到货与技术要求不符,由供应商无条件退换."}
挠性管260-268H5.00根{"型号":"260-268H","图号":"260-268H","材质":"一层耐高温、耐腐蚀、高压橡胶软管,二层不锈钢钢丝网套,两端带不锈钢护套固定金属软管","接头材质":"304","接头尺寸":"M22*1.5-90°","接头形式":"球面接头","长度":"700mm","压力":"≤8MPa","所属设备名称":"液压缸","设备型号":"350.5H","设备生产厂家":" ******限公司 ","国产/进口":"国产","使用寿命":"≥365天","特殊要求":"耐高温、高压、耐腐蚀、耐磨","参照标准":"GB/T 1 ****** 0","备注":"来货带合格证,若到货与技术要求不符,由供应商无条件退换."}
挠性管614-204H6.00根{"规格型号":"614-204H","公称直径":"36mm","公称压力":"4Mpa","长度":"1800","连接件形式":"丝扣连接","材质":"接头材质不锈钢304","特殊要求":"一端为90°弯头,接头面为球面接头密封,接头尺寸G1,耐高温≤300℃，工作压力≤4MPa,一层波纹管,二层不锈钢钢丝网套,三层两端带不锈钢(304)焊套固定金属软管","使用寿命":"730天","计量单位":"ROO","参照标准":"GB/T 1 ****** 0","备注":"适用于ASS-2700/1500-2G引风机"}
钢丝软管Φ140*0.4150.00米{"规格型号":"Φ140*0.4","公称直径":"140mm","公称压力":"0.1Mpa","长度":"20000mm","连接件形式":"管卡","材质":"镀铜钢丝+PU聚氨酯","特殊要求":"壁厚0.4mm钢丝直径1.5mm","使用寿命":"60天","计量单位":"MTR","参照标准":"CJ/T 189-2007","备注":"到货后附合格证明，必须符和技术要求，如不符 ******给公司 造成损失，按照相关规定给与罚款。"}
钢丝软管Φ3850.00米{"规格型号":"Φ38","公称直径":"44mm","公称压力":"0.5Mpa","长度":"500mm","连接件形式":"管箍固定","材质":"PU钢丝","特殊要求":"抗压耐磨","使用寿命":"365天","计量单位":"MTR","参照标准":"GB/T ****** 7","备注":"材质：***：***；使用寿命：***；验收标准：***，若产品不符合技术要求，予以免费退货更换."}
软管总成HXP****-30015.00根{"规格型号":"HXP****-3001","公称直径":"22mm","公称压力":"5Mpa","长度":"1200mm","连接件形式":"内螺纹连接","材质":"接头材质碳钢,一层波纹管;二层、三层不锈钢钢丝网套编织;三层两端带碳钢紧固压套固定","特殊要求":"接头尺寸M22*1.75,工作温度80℃,运行工作压力5MPa,接头一端为90°弯头,接头为梯形接头,带O型圈,O型圈材质为氟橡胶,另一端直头,接头为球面接头.耐高温、高压,耐腐蚀、耐磨.","使用寿命":"＞730天","计量单位":"ROO","参照标准":"GB/T 1 ****** 0","备注":"发货时管两端封闭保护.适用于ANN-1950/1000N豪顿华送风机.原 ******限公司 .来货带合格证,若到货与技术要求不符,由供应商无条件退换."}
软管总成HXP****-30023.00根{"规格型号":"HXP****-3002","公称直径":"22mm","公称压力":"12Mpa","长度":"1000mm","连接件形式":"内螺纹连接","材质":"接头材质碳钢,一层波纹管;二层、三层不锈钢钢丝网套编织;三层两端带碳钢紧固压套固定","特殊要求":"接头尺寸M22*1.75,工作温度80℃,运行工作压力5MPa,接头一端为90°弯头,接头为梯形接头,带O型圈,O型圈材质为氟橡胶,另一端直头,接头为球面接头.耐高温、高压,耐腐蚀、耐磨","使用寿命":"＞730天","计量单位":"ROO","参照标准":"GB/T 1 ****** 0","备注":"发货时管两端封闭保护.适用于ANN-1950/1000N豪顿华送风机.原 ******限公司 .来货带合格证,若到货与技术要求不符,由供应商无条件退换."}
胶管总成2-13-350010.00根{"规格型号":"2-13-3500","计量单位":"ROO"}
胶管总成2S-16-15007.00根{"型号":"2S-16-1500","图号":"无","材质":"内外层为合成橡胶,二层钢丝","接头材质":"碳钢","接头尺寸":"M30*2","接头形式":"内螺纹连接","长度":"1500mm","压力":"100bar","所属设备名称":"轧机","设备型号":"280/850*2000","设备生产厂家":"阿亨巴赫","国产/进口":"国产","使用寿命":"365天","特殊要求":"无","参照标准":"JB/T ****** 1-2007","备注":"到货验收标准:***.包装完好,内部备件无破碎及损坏.2.型号,参数等必须符合技术要求.3.升级型号的或替代型号的备件应带有升级或替代证明.4.若不符合技术要求或出现质量问题,则退换货,产生的费用由供货方承担."}
N2启动弯管GMS-GW50.00根{"规格型号":"GMS-GW","公称直径":"10mm","公称压力":"10Mpa","长度":"350mm","连接件形式":"螺纹","材质":"304不锈钢","特殊要求":"连接螺纹:****1.5,另一头M12*1.25","使用寿命":"730天","计量单位":"ROO","参照标准":"GB/T 1 ****** 2"}
金属波纹管DN40*83005.00根{"规格型号":"DN40*8300","公称直径":"40mm","公称压力":"1.6Mpa","长度":"8300mm","连接件形式":"两头均为1-1/2英寸11牙内螺纹，D型球头","材质":"304不锈钢","特殊要求":"外编钢丝网","使用寿命":"天","计量单位":"ROO"}
金属波纹管DN40*30015.00根{"规格型号":"DN40*300","公称直径":"40mm","公称压力":"1.6Mpa","长度":"300mm","连接件形式":"两头均为1-1/2英寸11牙内螺纹，D型球头","材质":"304不锈钢","特殊要求":"外编钢丝网","使用寿命":"天","计量单位":"ROO"}
金属波纹管DN40*35006.00根{"规格型号":"DN40*3500","公称直径":"40mm","公称压力":"1.6Mpa","长度":"3500mm","连接件形式":"两头均为1-1/2英寸11牙内螺纹，D型球头","材质":"304不锈钢","特殊要求":"外编钢丝网","使用寿命":"天","计量单位":"ROO"}
金属波纹管Φ325*3002.00个{"规格型号":"Φ325*300","公称压力":"1.0MPa","膨胀节形式":"轴向型","波纹管形式":"内压式","膨胀节端部形式":"法兰连接","10倍设计压力值":"10MPa","公称直径":"无","长边":"无","短边":"无","总长度":"300mm","轴向位移量":"无","横向位移量":"无","材质":"无","波形节材质":"304不锈钢","适用温度":"-15℃至100℃","适用压力":"1.0MPa","特殊要求":"耐高温耐腐蚀","使用寿命":"大于等于6个月天","参照标准":"GB/T 1 ****** 9","备注":"通过气体：***。尺寸：***：***，内径325mm，高度：***，共有13个波，两头均为法兰连接，法兰定位螺栓孔对角距：***，单个法兰螺栓孔数量：***，螺栓孔直径：***。"}
金属波纹管DN400-PN1.6/L558/3043.00个{"规格型号":"DN400-PN1.6/L558/304","公称直径":"400mm","公称压力":"1.6Mpa","长度":"558mm","连接件形式":"法兰连接","材质":"304","特殊要求":"必须配有合格证","使用寿命":"≥365天","计量单位":"ITE","参照标准":"GB/T 1 ****** 0"}
钢丝伸缩管Φ80*0.480.00米{"规格型号":"Φ80*0.4","公称直径":"80mm","公称压力":"0.1Mpa","长度":"20000mm","连接件形式":"管卡","材质":"镀铜钢丝+PU优质聚氨酯","特殊要求":"壁厚0.4mm,钢丝直径1.5mm","使用寿命":"30天","计量单位":"MTR","参照标准":"CJ/T 189-2007","备注":"如到货质量与技术要求不符给予退货处理，费用由供货商承担，到货附有合格证明。如因配件质量问题造成经济损失，则对供货商进行处罚。"}
高压胶管总成2-10*15308.00根{"型号":"2-10*1530","图号":"无","材质":"丁腈橡胶+普通钢丝；外包耐高温硅胶护套","接头材质":"碳钢","接头尺寸":"直头M18*1.5,D型头M18*1.5外丝H头","接头形式":"D型头外丝H头","长度":"1530mm","压力":"36MPa","所属设备名称":"铸造机","设备型号":"800S","设备生产厂家":"瓦格斯塔夫","国产/进口":"进口","使用寿命":"180天","特殊要求":"无","参照标准":"JB/T ****** 7","备注":"验收:***,所产生的费用由供货方承担."}
金属保护软管Φ36230.00米{"规格型号":"Φ36","公称直径":"36mm","材质":"内层：***/n外层：***","特殊要求":"高张力；耐高温；柔软；适应于高机械应力","使用寿命":"1年","计量单位":"MTR","参照标准":"IEC EN 61386-23"}
金属保护软管Φ45260.00米{"规格型号":"Φ45","公称直径":"45mm","材质":"内层：***/n外层：***","特殊要求":"高张力；耐高温；柔软；适应于高机械应力","使用寿命":"1年","计量单位":"MTR","参照标准":"IEC EN 61386-23"}
金属钢编软管1-1/4*80015.00根{"规格型号":"1-1/4*800","公称直径":"20mm","公称压力":"1.6Mpa","长度":"800mm","连接件形式":"两直头平口","材质":"不锈钢钢编","特殊要求":"连接螺母1英寸,牙数11","使用寿命":"365天","计量单位":"ROO","参照标准":"GB/T ****** 1"}
金属钢编软管DN80*4505.00根{"规格型号":"DN80*450","公称直径":"80mm","公称压力":"1.6Mpa","长度":"450mm","连接件形式":"法兰连接","材质":"304","特殊要求":"一端为活动法兰连接，一端为固定法兰连接，法兰螺栓孔8个，使用介质：***","使用寿命":"365天","计量单位":"ROO","参照标准":"SH/T ****** 7","备注":"1、自更换使用开始，质保期1年，在1年之内若发生渗漏现象，卖方需免费进行处理。/n2、到货与上述要求不符时（可优于上述要求），卖方需免费提供退换货服务，所产生的费用由卖方承担。"}
金属钢编软管DN50*11009.00根{"规格型号":"DN50*1100","公称直径":"50mm","公称压力":"1.6Mpa","长度":"1100mm","连接件形式":"法兰连接","材质":"304","特殊要求":"一端为活动法兰连接，一端为固定法兰连接，法兰螺栓孔4个，使用介质：***","使用寿命":"365天","计量单位":"ROO","参照标准":"SH/T ****** 7","备注":"1、自更换使用开始，质保期1年，在1年之内若发生渗漏现象，卖方需到现场免费进行处理。/n2、到货与上述要求不符时（可优于上述要求），卖方需免费提供退换货服务，所产生的费用由卖方承担。"}
金属高温软管DN10*800mm4.00根{"规格型号":"DN10*800mm","公称直径":"DN10mm","公称压力":"1.6Mpa","长度":"800mm","连接件形式":"锥口螺纹连接","材质":"不锈钢","特殊要求":"耐高温150度以上。接头均为直头。","使用寿命":"365天","计量单位":"ROO","参照标准":"GB/T 1 ****** 0","备注":"使用介质为高温导热油，需要耐温150度以上。能反复折弯不破损，不漏油。外层有不锈钢编织，此管为不锈钢软(波纹)管。如有技术要求不符，产生的退换货，厂家承担。"}
金属高温软管DN10*800mm2.00根{"规格型号":"DN10*800mm","公称直径":"10mm","公称压力":"1.6Mpa","长度":"800mm","连接件形式":"锥口螺纹连接","材质":"不锈钢","特殊要求":"耐高温150度.一头为直头，一头为90度弯头。","使用寿命":"365天","计量单位":"ROO","参照标准":"GB/T 1 ****** 0","备注":"使用介质为高温导热油，需要耐温150度以上。能反复折弯不破损，不漏油。外层有不锈钢编织，此管为不锈钢软(波纹)管。如有技术要求不符，产生的退换货，厂家承担。"}
不锈钢丝软管8-290060.00根{"规格型号":"8-2900","公称压力":"1.6MPa","长度":"2900mm","连接件形式":"卡套式","材质":"不锈钢304","特殊要求":"接头尺寸外径：***","使用寿命":"6个月","计量单位":"ROO"}
不锈钢丝软管10*120016.00根规格型号:"10*1200","公称压力":"1.6MPa","长度":"1200mm","连接件形式":"卡套式","材质":"不锈钢304","特殊要求":"接头尺寸外径：***","使用寿命":"6个月","计量单位":"ROO"}
不锈钢丝软管8-8004.00根{"规格型号":"8-800","公称压力":"1.6MPa","长度":"800mm","连接件形式":"卡套式","材质":"不锈钢304","特殊要求":"接头尺寸外径：***","使用寿命":"6个月","计量单位":"ROO"}
不锈钢丝软管Ф16*2.8m3.00根{"规格型号":"Ф16*2.8m","公称直径":"16mm","公称压力":"16Mpa","长度":"2800mm","连接件形式":"卡套式连接","材质":"表层不锈钢304编制,内层合成橡胶","使用寿命":"1095天","计量单位":"ROO"}
不锈钢丝软管Ф12*1.2m7.00根{"规格型号":"Ф12*1.2m","公称直径":"12mm","公称压力":"16Mpa","长度":"1200mm","连接件形式":"卡套式连接","材质":"表层不锈钢304编制,内层合成橡胶","使用寿命":"1095天","计量单位":"ROO"}
不锈钢丝软管Ф18*2.88.00根{"规格型号":"Ф18*2.8","公称直径":"18mm","公称压力":"16Mpa","长度":"2800mm","连接件形式":"卡套式连接","材质":"表层不锈钢304编制,内层合成橡胶","使用寿命":"1095天","计量单位":"ROO"}
不锈钢丝软管8-120017.00根{"规格型号":"8-1200","公称压力":"1.6MPa","长度":"1200mm","连接件形式":"卡套式","材质":"不锈钢304","特殊要求":"接头尺寸外径：***","使用寿命":"6个月","计量单位":"ROO"}
不锈钢丝软管10*30005.00根{"规格型号":"10*3000","公称压力":"1.6MPa","长度":"3000mm","连接件形式":"卡套式","材质":"不锈钢304","特殊要求":"接头尺寸外径：***","使用寿命":"6个月","计量单位":"ROO"}
不锈钢丝软管Φ10*2.8m3.00根{"规格型号":"Φ10*2.8m","公称直径":"10mm","公称压力":"16Mpa","长度":"2800mm","连接件形式":"卡套式连接","材质":"表层不锈钢304编制,内层合成橡胶","使用寿命":"1095天","计量单位":"ROO"}
不锈钢丝软管Ф12*2.8m6.00根{"规格型号":"Ф12*2.8m","公称直径":"12mm","公称压力":"16Mpa","长度":"2800mm","连接件形式":"卡套式连接","材质":"表层不锈钢304编制,内层合成橡胶","使用寿命":"1095天","计量单位":"ROO"}
丝口钢编软管DN20*60020.00根{"规格型号":"DN20*600","公称直径":"20mm","公称压力":"2.5MPa","长度":"600mm","连接件形式":"两头为内丝螺纹","材质":"304不锈钢、氟橡胶","使用寿命":"1年","计量单位":"ROO"}
丝口钢编软管DN20*500050.00根{"规格型号":"DN20*5000","公称直径":"20mm","公称压力":"2.5Mpa","长度":"5000mm","材质":"304不锈钢、氟橡胶","使用寿命":"12个月","计量单位":"ROO","参照标准":"GB ****** 1"}
下工作辊冷却胶管R1-1/2*1630*RRUU15.00根{"型号":"R1-1/2*1630*RRUU","材质":"胶管管材:***,外胶层:***,","接头材质":"镀锌碳钢","接头尺寸":"R1-1/2","接头形式":"两端均为C型压扩活接头","长度":"1630mm,偏差+2%","压力":"120bar","国产/进口":"国产","使用寿命":"730天","特殊要求":"软管要求内附3层钢编,外层橡胶包覆.环境温度:＜100℃,输送介质:***,介质温度:***-65℃"}
下工作辊咬入胶管R1-1/2*2200*RRUU15.00根{"型号":"R1-1/2*2200*RRUU","材质":"胶管管材:***,外胶层:***,","接头材质":"镀锌碳钢","接头尺寸":"R1-1/2","接头形式":"两端均为C型压扩活接头","长度":"2200mm,偏差+2%","压力":"14MPa","使用寿命":"240天","特殊要求":"软管要求内附3层钢编,外层橡胶包覆"}
三层铠甲燃气管Y2006.00根{"输送介质":"天然气","规格":"Y200","材质":"NBR、PVC、锌铁皮，表面被覆耐燃烧PVC材料","连接方式":"两头宝塔插口","被覆层材质":"PVC","被覆层等级":"阻燃等级为ul-94:***-0","计量单位":"ROO","参照标准":"GB 2 ****** 3","备注":"技术要求：/n1.工作压力：≤10KPa/n2.工作温度：-10℃-50℃/n3.长度：≥200cm/n4.接头外径：***。.接口内径：***。管外径：***/n5.插口适用于9-11.5mm宝塔头，带二个可调节卡扣/n6.使用寿命：***/n到货验收：***，供应商给予免费退换货处理"}
法兰金属波纹管35-38006.00根{"规格型号":"35-3800","计量单位":"ROO"}
法兰金属波纹管102*37008.00根{"规格型号":"102*3700","计量单位":"ROO"}
法兰金属波纹管290-3605.00个{"规格型号":"290-360","公称压力":"0.4Mpa","膨胀节形式":"轴向型","波纹管形式":"内压式","膨胀节端部形式":"法兰连接","10倍设计压力值":"4Mpa","公称直径":"DN250mm","长边":"420mm","短边":"360mm","总长度":"360mm","轴向位移量":"60mm","横向位移量":"50mm","材质":"铸钢","波形节材质":"不锈钢304","适用温度":"100℃","适用压力":"0.4Mpa","特殊要求":"耐高温，耐腐蚀","使用寿命":"730天","参照标准":"GB/T 1 ****** 9","备注":"验收标准：***。所产生的费用全部由供货商承担。"}
不锈钢波纹软管Φ296mm*L716mm5.00个{"规格型号":"Φ296mm*L716mm","公称直径":"240mm","公称压力":"0.1Mpa","长度":"716mm","连接件形式":"法兰","材质":"波纹管材质304，下端底座材质304，上端法兰及变径材质45钢","特殊要求":"波纹管壁厚0.****.5mm，波纹呈弧形","使用寿命":"≥730天","计量单位":"ITE","参照标准":"GB/T 1 ****** 0","备注":"上端法兰盘外径445mm内径330mm孔距397mm,，法兰盘厚度为12mm"}
不锈钢波纹软管DN406.00根{"规格型号":"DN40","公称直径":"40mm","公称压力":"1.6Mpa","长度":"500mm","连接件形式":"法兰连接","材质":"304不锈钢","特殊要求":"一端为平焊法兰，一端为活套法兰","使用寿命":"2920天","计量单位":"ROO","参照标准":"GB/T 1 ****** 0、GB/T ****** 0"}
不锈钢波纹软管DN404.00根{"规格型号":"DN40","公称直径":"40mm","公称压力":"1.6Mpa","长度":"500mm","连接件形式":"螺母连接","材质":"304不锈钢","特殊要求":"两端为活动螺母，螺纹为1½管螺纹","使用寿命":"2920天","计量单位":"ROO","参照标准":"GB/T 1 ****** 0"}
不锈钢丝编织软管DN15/L5090.00根{"规格型号":"DN15/L50","公称直径":"15mm","公称压力":"1Mpa","长度":"500mm","材质":"螺帽和内芯为黄铜，产品外层为304不锈钢丝编织网，内管为EPDM橡胶，垫片为NBR橡胶","使用寿命":"≥2年","计量单位":"ROO"}
不锈钢外编钢丝管Ф6100.00米{"规格型号":"Ф6","公称直径":"6mm","公称压力":"Mpa","长度":"mm","材质":"Cr13","特殊要求":"外径：***±0.5mm，内径：***±0.5mm","使用寿命":"1460天","计量单位":"MTR"}
直角金属钢编软管DN50*700/DN50*9107.00根{"规格型号":"DN50*700/DN50*910","公称直径":"50mm","公称压力":"1.6Mpa","长度":"1610mm","连接件形式":"法兰连接","材质":"304","特殊要求":"两端为活动法兰连接，使用介质：***","使用寿命":"365天","计量单位":"ROO","参照标准":"SH/T ****** 7","备注":"1、自更换使用开始，质保期1年，在1年之内若发生渗漏现象，卖方需免费进行处理。/n2、到货与上述要求不符时（可优于上述要求），卖方需免费提供退换货服务，所产生的费用由卖方承担。"}
直角金属钢编软管DN50*850/DN80*85011.00根{"规格型号":"DN50*850/DN80*850","公称直径":"50/80mm","公称压力":"1.6Mpa","长度":"1700mm","连接件形式":"法兰连接","材质":"304","特殊要求":"两端为活动法兰连接，使用介质：***，一端法兰为DN50;Y一端法兰为DN80","使用寿命":"365天","计量单位":"ROO","参照标准":"SH/T ****** 7","备注":"1、自更换使用开始，质保期1年，在1年之内若发生渗漏现象，卖方需免费进行处理。/n2、到货与上述要求不符时（可优于上述要求），卖方需免费提供退换货服务，所产生的费用由卖方承担。"}
直角金属钢编软管DN50*580/DN50*5507.00根{"规格型号":"DN50*580/DN50*550","公称直径":"50mm","公称压力":"1.6Mpa","长度":"1130mm","连接件形式":"法兰连接","材质":"304","特殊要求":"两端为活动法兰连接，使用介质：***","使用寿命":"365天","计量单位":"ROO","参照标准":"SH/T ****** 7","备注":"1、自更换使用开始，质保期1年，在1年之内若发生渗漏现象，卖方需免费进行处理。/n2、到货与上述要求不符时（可优于上述要求），卖方需免费提供退换货服务，所产生的费用由卖方承担。"}
波纹减震器DN4005.00个{"规格型号":"DN400","公称压力":"1.6MPa","材质":"304不锈钢，法兰：Ｑ235，拉筋:***"}
短节G1/29.00个{"规格型号":"G1/2","公称直径":"20mm","公称压力":"1Mpa","长度":"120mm","连接件形式":"活动接头，G1/2内螺纹连接","材质":"304不锈钢","特殊要求":"与现场设备配套使用","使用寿命":"≥365天","计量单位":"ITE","参照标准":"GB/T 1 ****** 0","备注":"验收标准：/n1、产品型号一致，但接口尺寸不满足现场生产需要，退货。/n2、产品型号不一致，但接口尺寸满足现场生产需要，厂家出具证明，办理入库。/n3、产品损坏、破损、变形等现象，退货。"}
减震器DN80~258.00个{"规格型号":"DN80~25","公称压力":"0.25~4Mpa","材质":"不锈钢"}
软接头DN250-165.00个{"规格型号":"DN250-16","公称压力":"1.6MPa","总长度":"200mm","材质":"法兰材质:***","适用温度":"100℃","特殊要求":"采用浸胶尼龙帘子布内外面采用高强度耐老化极性橡胶材料，丁晴橡胶","使用寿命":"1年","参照标准":"GB/T 2 ****** 0"}
软接头DN125-1612.00个{"规格型号":"DN125-16","公称压力":"1.6Mpa","膨胀节形式":"无","波纹管形式":"无","膨胀节端部形式":"无","10倍设计压力值":"无","公称直径":"DN125","长边":"无","短边":"无","总长度":"165mm","轴向位移量":"8mm","横向位移量":"10mm","材质":"法兰材质:***","波形节材质":"无","适用温度":"100℃","适用压力":"1.6Mpa","特殊要求":"耐高温,采用浸胶尼龙帘子布内外面采用高强度耐老化极性橡胶材料，丁晴橡胶","使用寿命":"1年天","参照标准":"GB/T 2 ****** 0","备注":"无品牌厂家要求,到货时需附带出厂合格证及出厂验收报告.到货后若不符合技术要求,必须退换货处理,产生的费用由供应商承担."}
软接头DN250-1010.00个{"规格型号":"DN250-10","公称压力":"1Mpa","膨胀节形式":"可曲扰橡胶膨胀节","波纹管形式":"无","膨胀节端部形式":"无","10倍设计压力值":"无","公称直径":"250mm","长边":"无","短边":"无","总长度":"230mm","轴向位移量":"14mm","横向位移量":"15mm","材质":"法兰材质:***","波形节材质":"无","适用温度":"100℃","适用压力":"1Mpa","特殊要求":"采用浸胶尼龙帘子布内外面采用高强度耐老化极性橡胶材料，丁晴橡胶；两端带Q235B法兰","使用寿命":"≥365天","参照标准":"GB/T 2 ****** 0","备注":"橡胶接头规格参数:***:***(mm);法兰外径:***(mm);螺栓孔中心圆直径350(mm) 螺栓孔径23(mm) 螺栓数量12个/n验收标准:***,备件无划伤/破损及凹凸不平现象,到货需附带材质检测报告/出厂合格证,如不符合技术要求.退换货处理,产生费用由供货方承担."}
软接头DN150-1610.00个{"规格型号":"DN150-16","公称压力":"1.6MPa","总长度":"160mm","材质":"法兰材质:***","适用温度":"100℃","特殊要求":"采用浸胶尼龙帘子布内外面采用高强度耐老化极性橡胶材料，丁晴橡胶","使用寿命":"8个月","参照标准":"GB/T 2 ****** 0"}
软接头DN200-166.00个{"规格型号":"DN200-16","公称压力":"1.6MPa","总长度":"180mm","材质":"法兰材质:***","适用温度":"100℃","特殊要求":"采用浸胶尼龙帘子布内外面采用高强度耐老化极性橡胶材料，丁晴橡胶","使用寿命":"8个月","参照标准":"GB/T 2 ****** 0"}
软接头DN100-166.00个{"规格型号":"DN100-16","公称压力":"1.6MPa","总长度":"150mm","材质":"法兰盘材质：***","适用温度":"100℃","特殊要求":"采用浸胶尼龙帘子布内外面采用高强度耐老化极性橡胶材料，丁晴橡胶","使用寿命":"1年","参照标准":"GB/T 2 ****** 0"}
耐油软接头DN65/PN16/30480.00个{"规格型号":"DN65/PN16/304","公称压力":"1.6Mpa","公称直径":"DN65","材质":"球体材质：***+锦纶帘子布；法兰：***","适用温度":"80°C","使用寿命":"365天","参照标准":"GB/T 2 ****** 0"}
高温橡胶软接头DN450/PN105.00个{"规格型号":"DN450/PN10","公称压力":"1Mpa","膨胀节形式":"无","波纹管形式":"无","膨胀节端部形式":"无","10倍设计压力值":"10MPa","公称直径":"450mm","长边":"无","短边":"无","总长度":"255±20mm","轴向位移量":"15mm","横向位移量":"22mm","材质":"丁腈橡胶,两端带铸钢法兰","波形节材质":"无","适用温度":"-10℃-200℃","适用压力":"1MPa","特殊要求":"介质；循环水","使用寿命":"1095天","参照标准":"JB/T 1 ****** 5","备注":"到货验收标准:***.包装完好,内部备件无破碎、损坏.2.型号,参数,等必须符合技术要求.3.升级型号的或替代型号的备件应带有升级或替代证明.4.若不符合技术要求或出现质量问题,则退换货,产生的费用由供货方承担."}
可曲挠橡胶接头DN50-1610.00个{"规格型号":"DN50-16","公称压力":"1.6MPa","公称直径":"50","总长度":"105","材质":"球体材质:***+锦纶帘子布 法兰盘材质：***#","波形节材质":"橡胶","适用压力":"1.6MPa","使用寿命":"1年","参照标准":"GB/T 2 ****** 0"}
可曲挠橡胶接头DN12002.00个{"规格型号":"DN1200","公称压力":"1.6Mpa","膨胀节形式":"可曲扰橡胶膨胀节","波纹管形式":"无","膨胀节端部形式":"无","10倍设计压力值":"无","公称直径":"DN1200","长边":"无","短边":"无","总长度":"500mm","轴向位移量":"80mm","横向位移量":"60mm","材质":"橡胶材质：***、法兰材质：***","波形节材质":"无","适用温度":"0~100℃","适用压力":"0~1.6MPa","特殊要求":"法兰盘带4根降紧螺栓（全丝）带螺帽","使用寿命":"≥730天","参照标准":"GB/T 2 ****** 0","备注":"可曲扰橡胶接头系内胶层、增强层、外胶层粘合模压硫化成型的橡胶球体和嵌套金属法兰组成，双球体凸面法兰密封，与此技术要求不符厂家免费退换货，到货提供相应材质报告及产品合格证。"}
可曲挠橡胶接头DN50-165.00个{"规格型号":"DN50-16","公称压力":"1.6MPa","材质":"球体材质:***+锦纶帘子布 法兰盘材质：***","波形节材质":"橡胶","适用压力":"1.6MPa","使用寿命":"1年","参照标准":"GB/T 2 ****** 0"}
可曲扰橡胶接头GJQ-DN5502.00个{"规格型号":"GJQ-DN550","公称压力":"0~1Mpa","膨胀节形式":"可曲扰橡胶膨胀节","波纹管形式":"无","膨胀节端部形式":"无","10倍设计压力值":"无","公称直径":"550mm","长边":"无","短边":"无","总长度":"260mm","轴向位移量":"41mm","横向位移量":"22mm","材质":"丁基胶/天然胶","波形节材质":"无","适用温度":"0~100℃","适用压力":"0~1Mpa","特殊要求":"法兰材质:***,法兰盘带4根降紧螺栓(全丝)带螺帽32个.","使用寿命":"730天","参照标准":"GB/T 2 ****** 0","备注":"到货带相应的材质报告及产品合格证,到货与技术要求不符予以退/换货."}
可曲扰橡胶接头GJQ-DN9005.00个{"规格型号":"GJQ-DN900","公称压力":"1.0Mpa","膨胀节形式":"可曲扰橡胶接头","波纹管形式":"无","膨胀节端部形式":"无","10倍设计压力值":"无","公称直径":"900","长边":"无","短边":"无","总长度":"260mm","轴向位移量":"40mm","横向位移量":"22mm","材质":"丁基胶/天然胶","波形节材质":"无","适用温度":"0~100°","适用压力":"0~1.0Map","特殊要求":"法兰材质:***,法兰盘带4根降紧螺栓(全丝)带螺帽32个.","使用寿命":"730天","参照标准":"GB/T 2 ****** 0","备注":"到货带相应的材质报告及产品合格证,到货与技术要求不符予以退/换货."}
可曲扰橡胶接头GJQ-DN5005.00个{"规格型号":"GJQ-DN500","公称压力":"1Mpa","膨胀节形式":"可曲扰橡胶膨胀节","波纹管形式":"无","膨胀节端部形式":"无","10倍设计压力值":"无","公称直径":"500mm","长边":"无","短边":"无","总长度":"260mm","轴向位移量":"41mm","横向位移量":"22mm","材质":"丁基胶/天然胶","波形节材质":"无","适用温度":"0~100℃","适用压力":"0~1MPa","特殊要求":"法兰材质:***,法兰盘带4根降紧螺栓(全丝)带螺帽32个.","使用寿命":"730天","参照标准":"GB/T 2 ****** 0","备注":"到货带相应的材质报告及产品合格证,到货与技术要求不符予以退/换货."}
可曲扰橡胶接头GJQ-DN1000(螺栓孔距:***5.00个{"规格型号":"GJQ-DN1000(螺栓孔距:***.)","公称压力":"1.0Mpa","膨胀节形式":"可曲扰橡胶接头","波纹管形式":"无","膨胀节端部形式":"无","10倍设计压力值":"无","公称直径":"1000","长边":"无","短边":"无","总长度":"280mm","轴向位移量":"40mm","横向位移量":"22mm","材质":"丁基胶/天然胶","波形节材质":"无","适用温度":"0~100°","适用压力":"0~1.0Map","特殊要求":"法兰材质:***,法兰盘带4根降紧螺栓(全丝)带螺帽32个.","使用寿命":"730天","参照标准":"GB/T 2 ****** 0","备注":"到货带相应的材质报告及产品合格证,到货与技术要求不符予以退/换货./n螺栓孔距:***."}
可曲扰橡胶接头GJQ-DN1000(螺栓孔距:***10.00个{"规格型号":"GJQ-DN1000(螺栓孔距:***)","公称压力":"1.0Mpa","膨胀节形式":"可曲扰橡胶接头","波纹管形式":"无","膨胀节端部形式":"无","10倍设计压力值":"无","公称直径":"1000","长边":"无","短边":"无","总长度":"280mm","轴向位移量":"40mm","横向位移量":"22mm","材质":"丁基胶/天然胶","波形节材质":"无","适用温度":"0~100°","适用压力":"0~1.0Map","特殊要求":"法兰材质:***,法兰盘带4根降紧螺栓(全丝)带螺帽32个.","使用寿命":"730天","参照标准":"GB/T 2 ****** 0","备注":"到货带相应的材质报告及产品合格证,到货与技术要求不符予以退/换货./n螺栓孔距:***."}
可曲扰橡胶接头GJQ-DN500（非标）6.00个{"规格型号":"GJQ-DN500（非标）","公称压力":"1Mpa","膨胀节形式":"可曲扰橡胶膨胀节","波纹管形式":"无","膨胀节端部形式":"无","10倍设计压力值":"无","公称直径":"500mm","长边":"无","短边":"无","总长度":"255mm","轴向位移量":"41mm","横向位移量":"22mm","材质":"丁基胶、天然胶","波形节材质":"无","适用温度":"0~100℃","适用压力":"0~1MPa","特殊要求":"法兰材质:***,法兰盘带4根降紧螺栓(全丝)带螺帽32个。","使用寿命":"≥730天","参照标准":"GB/T 2 ****** 0","备注":"法兰参数:***:***.大头法兰外径:***.螺栓孔中心圆直径:***.螺栓孔径:***.螺栓数量:***.小头法兰外径:***,螺栓中心距:***,螺栓孔径:***,螺栓数量:***./n验收标准:***,到货表面不准有划伤及凹凸不平现象,若到货与技术要求不符予以退/换货."}
可曲扰橡胶接头GJQ-DN4505.00个{"规格型号":"GJQ-DN450","公称压力":"1Mpa","膨胀节形式":"可曲扰橡胶膨胀节","波纹管形式":"无","膨胀节端部形式":"无","10倍设计压力值":"无","公称直径":"450mm","长边":"无","短边":"无","总长度":"260mm","轴向位移量":"40mm","横向位移量":"22mm","材质":"丁基胶/天然胶","波形节材质":"无","适用温度":"0~100℃","适用压力":"0~1MPa","特殊要求":"法兰材质:***,法兰盘带4根降紧螺栓(全丝)带螺帽32个.","使用寿命":"730天","参照标准":"GB/T 2 ****** 0","备注":"到货带相应的材质报告及产品合格证,到货与技术要求不符予以退/换货."}
可曲扰橡胶接头DN25013.00个{"规格型号":"DN250","公称压力":"1.6Mpa","膨胀节形式":"可曲扰橡胶膨胀节","波纹管形式":"无","膨胀节端部形式":"无","10倍设计压力值":"无","公称直径":"DN250","长边":"无","短边":"无","总长度":"225","轴向位移量":"40mm","横向位移量":"22mm","材质":"丁基胶/天然胶","波形节材质":"无","适用温度":"0~100℃","适用压力":"0~1.6Mpa","特殊要求":"法兰材质:***,法兰盘带4根降紧螺栓(全丝)带螺帽","使用寿命":"730天","参照标准":"GB/T 2 ****** 0"}
补偿器DN400*60048.00件{"规格型号":"DN400*600","公称压力":"1MPa","公称直径":"DN400","总长度":"600mm","波形节材质":"304不锈钢"}
补偿器DN786.00个{"规格型号":"DN78","公称压力":"1.6MPaMPa"}
波纹补偿器DN65-162.00个{"规格型号":"DN65-16","公称压力":"1.6Mpa","膨胀节形式":"法兰连接","波纹管形式":"法兰连接","膨胀节端部形式":"法兰","10倍设计压力值":"16","公称直径":"65mm","长边":"无","短边":"无","总长度":"190mm","轴向位移量":"40mm","横向位移量":"22mm","材质":"法兰：Ｑ235","波形节材质":"304不锈钢","适用温度":"300℃","适用压力":"1.6Mpa","特殊要求":"无","使用寿命":"180天","参照标准":"GB/T 1 ****** 9","备注":"到货验收:***,外观完好无损,带有合格证.如所送到物品不符合技术要求或质量不合格,供货商必须无条件退换货,由此产生的费用由供货商负责."}
波纹补偿器DN2508.00件{"规格型号":"DN250","公称压力":"1.0Mpa","膨胀节形式":"波纹结构","波纹管形式":"轴向型","膨胀节端部形式":"法兰式","10倍设计压力值":"10MPa","公称直径":"250mm","长边":"/","短边":"/","总长度":"250mm","轴向位移量":"40mm","横向位移量":"20mm","材质":"法兰为Q235","波形节材质":"304不锈钢","适用温度":"100-300℃","适用压力":"1.0MPa","特殊要求":"如到货不符合技术要求,由供应商无条件进行更换或退货,所产生的费用由供货商负责","使用寿命":"730天","参照标准":"GB/T 1 ****** 9","备注":"具体参数以现场实际为准"}
波纹补偿器DN3004.00件{"规格型号":"DN300","公称压力":"1MPa","总长度":"250mm","轴向位移量":"40mm","波形节材质":"304"}
波纹补偿器DN80*125*4008.00个{"规格型号":"DN80*125*400","公称压力":"1.6MPa","膨胀节形式":"法兰","材质":"304不锈钢"}
波纹补偿器DN1001.00个{"规格型号":"DN100","公称压力":"1.6MPa","膨胀节形式":"金属膨胀节","膨胀节端部形式":"法兰","公称直径":"100","总长度":"360","材质":"碳钢","波形节材质":"304不锈钢","适用温度":"300℃","使用寿命":"2年","参照标准":"GB/T 1 ****** 9"}
波纹补偿器DN150*2303.00个{"规格型号":"DN150*230","公称压力":"1.6Mpa","膨胀节形式":"轴向","波纹管形式":"无","膨胀节端部形式":"无","10倍设计压力值":"无","公称直径":"150mm","长边":"无","短边":"无","总长度":"230mm","轴向位移量":"±25mm","横向位移量":"±15mm","材质":"304不锈钢","波形节材质":"304不锈钢","适用温度":"≤100℃","适用压力":"1MPa","特殊要求":"8孔法兰 一端为活法兰","使用寿命":"180天","参照标准":"GB/T 12777-99","备注":"到货验收：***，对于不符合技术的要求退换货，所有产生费用由卖家进行承担。"}
波纹补偿器1.6TNY125*8FB2.00个{"规格型号":"1.6TNY125*8FB","公称压力":"1.6MPa","波纹管形式":"波纹管形式","公称直径":"DN125","总长度":"430mm","材质":"内层采用316L不锈钢环形无缝波纹管；法兰：***","适用温度":"350℃","使用寿命":"1年","参照标准":"GB/T 1 ****** 8"}
波纹补偿器DN500/PN104.00个{"规格型号":"DN500/PN10","公称压力":"1.0Mpa","膨胀节形式":"法兰连接","波纹管形式":"6波纹","膨胀节端部形式":"轴向波纹膨胀节","10倍设计压力值":"10Mpa","公称直径":"500mm","长边":"无","短边":"无","总长度":"600mm","轴向位移量":"131mm","横向位移量":"无","材质":"法兰：Ｑ235，拉筋:***","波形节材质":"304不锈钢","适用温度":"零下20-100摄氏度","适用压力":"0.8","特殊要求":"法兰外径 670螺栓孔中心圆直径 620 密封面直径 585 螺栓孔径25 螺栓数量 20","使用寿命":"730天","参照标准":"GB/T 1 ****** 9","备注":"1.产品到货附合格证./n2.不符合技术要求免费退换货."}
波纹补偿器DZUF16-300-2013.00个{"规格型号":"DZUF16-300-20","公称压力":"1.6Mpa","膨胀节形式":"单式轴向型","波纹管形式":"无加强U","膨胀节端部形式":"法兰","10倍设计压力值":"1.6Mpa","公称直径":"DN300","长边":"无","短边":"无","总长度":"240mm","轴向位移量":"20mm","横向位移量":"0","材质":"波纹管：***：***","波形节材质":"304不锈钢","适用温度":"≤150℃","适用压力":"1.6Mpa","特殊要求":"带4个均匀分布螺纹导向杆 16个螺栓孔 导流筒厚度≥1.5mm","使用寿命":"1825天","参照标准":"GB/T 1 ****** 9"}
管道补偿器14/"*14.00个{"规格型号":"14/"*12/"","公称压力":"0.4Mpa","膨胀节形式":"波纹管膨胀节","波纹管形式":"轴向","膨胀节端部形式":"法兰","10倍设计压力值":"4Mpa","公称直径":"356mm","长边":"533mm","短边":"476.5mm","总长度":"304mm","轴向位移量":"25mm","横向位移量":"13mm","材质":"法兰材质为碳钢","波形节材质":"304不锈钢","适用温度":"250℃","适用压力":"0.4Mpa","特殊要求":"无","使用寿命":"365天","参照标准":"GB/T 1 ****** 8","备注":"波纹管壁厚不小于2mm,法兰盘外径533mm,法兰盘螺栓孔距476.5mm,螺栓孔直径29mm,螺栓孔数12个,法兰厚度10mm"}
管道补偿器DN100/PN1.020.00根{"规格型号":"DN100/PN1.0","公称压力":"1.0Mpa","膨胀节形式":"伸缩式","波纹管形式":"无","膨胀节端部形式":"法兰连接","10倍设计压力值":"10","公称直径":"100","长边":"无","短边":"无","总长度":"430mm","轴向位移量":"320mm","横向位移量":"0","材质":"外壳、芯管采用无缝钢管20#钢","波形节材质":"无","适用温度":"≤350℃","适用压力":"1.0","特殊要求":"内伸缩管长380mm","使用寿命":"1460天","参照标准":"GB/T 1 ****** 9","备注":"如到货后不符合技术要求，厂家应给予以退换货处理。产生费用由供货商负责"}
管道补偿器12/"*112.00个{"规格型号":"12/"*13/"","公称压力":"0.4Mpa","膨胀节形式":"波纹管膨胀节","波纹管形式":"轴向","膨胀节端部形式":"法兰","10倍设计压力值":"4Mpa","公称直径":"304mm","长边":"483mm","短边":"432mm","总长度":"330mm","轴向位移量":"25mm","横向位移量":"13mm","材质":"法兰材质为碳钢","波形节材质":"304不锈钢","适用温度":"250℃","适用压力":"0.5Mpa","特殊要求":"无","使用寿命":"365天","参照标准":"GB/T 1 ****** 8","备注":"波纹管壁厚不小于2mm,法兰盘外径483mm,法兰盘螺栓孔距432mm,螺栓孔直径25mm,螺栓孔数12个,法兰厚度10mm"}
管道补偿器DN125/PN1010.00个{"规格型号":"DN125/PN10","公称压力":"1.0Mpa","膨胀节形式":"伸缩式","波纹管形式":"无","膨胀节端部形式":"法兰连接","10倍设计压力值":"10","公称直径":"DN125","长边":"无","短边":"无","总长度":"500mm","轴向位移量":"400mm","横向位移量":"0","材质":"外壳、芯管采用无缝钢管20#钢","波形节材质":"无","适用温度":"≤350℃","适用压力":"1.0","特殊要求":"内伸缩管长450mm","使用寿命":"1460天","参照标准":"GB/T 1 ****** 9","备注":"如到货后不符合技术要求，厂家应给予以退换货处理。产生费用由供货商负责"}
管道补偿器DN150/PN106.00个{"规格型号":"DN150/PN10","公称压力":"1.0Mpa","公称直径":"150mm","材质":"304不锈钢","波形节材质":"304不锈钢","特殊要求":"具体参数以现场实际为准","使用寿命":"365天"}
套管补偿器630*123.00个{"规格型号":"630*12","公称压力":"≤2.5Mpa","膨胀节形式":"双向套管补偿器","波纹管形式":"无","膨胀节端部形式":"焊接","10倍设计压力值":"2.5Mpa","公称直径":"DN600","长边":"无","短边":"无","总长度":"1200mm","轴向位移量":"360mm","横向位移量":"无","材质":"外壳、芯管采用无缝钢管（20#钢）","波形节材质":"无","适用温度":"≤350℃","适用压力":"≤2.5MPa","特殊要求":"配套螺栓8.8级","使用寿命":"720天","参照标准":"GB/T 699","备注":"执行建设部关于《城市供热补偿器焊制套筒补偿器》标准:***/T 487"}
套筒补偿器DN9003.00个{"规格型号":"DN900","公称压力":"1.6Mpa","膨胀节形式":"单向套筒式","波纹管形式":"无","膨胀节端部形式":"35°±2.5°坡口","10倍设计压力值":"//","公称直径":"DN900","长边":"//","短边":"//","总长度":"1720mm","轴向位移量":"300mm","横向位移量":"//","材质":"Q235B","波形节材质":"//","适用温度":"150℃","适用压力":"1.6MPa","特殊要求":"芯管精车电镀后为φ918*15.5-16","使用寿命":"5475天","参照标准":"CJ/T 487-2015"}
套筒补偿器DN7002.00个{"规格型号":"DN700","公称压力":"1.6Mpa","膨胀节形式":"单向套筒式","波纹管形式":"无","膨胀节端部形式":"35°±2.5°坡口","10倍设计压力值":"//","公称直径":"DN700","长边":"//","短边":"//","总长度":"1200mm","轴向位移量":"300mm","横向位移量":"//","材质":"Q235B","波形节材质":"//","适用温度":"150℃","适用压力":"1.6MPa","特殊要求":"芯管精车电镀后为φ718*13.5-14","使用寿命":"5475天","参照标准":"CJ/T 487-2015"}
波形补偿器2750*1200*300mm3.00个{"规格型号":"2750*1200*300mm","公称压力":"0.01Mpa","膨胀节形式":"轴向型","波纹管形式":"矩形圆角","膨胀节端部形式":"焊接","10倍设计压力值":"0.1mpa","公称直径":"无","长边":"2750mm","短边":"1200mm","总长度":"2750mm","轴向位移量":"10mm","横向位移量":"5mm","材质":"不锈钢316L*1.5mm","波形节材质":"不锈钢316L*1.5mm","适用温度":"180℃","适用压力":"10kpa","特殊要求":"3波纹","使用寿命":"1000天","参照标准":"GB/T 1 ****** 8"}
弹性补偿器DN532*4758.00个{"规格型号":"DN532*475","公称压力":"0.7Mpa","膨胀节形式":"轴向膨胀节","波纹管形式":"法兰连接","膨胀节端部形式":"法兰","10倍设计压力值":"7Mpa","公称直径":"350mm","长边":"无","短边":"无","总长度":"475mm","轴向位移量":"175mm","横向位移量":"0mm","材质":"法兰Q235碳钢","波形节材质":"304不锈钢","适用温度":"300℃","适用压力":"0.7Mpa","特殊要求":"法兰外径:***±10mm;内径350mm±5mm带3个均匀分布螺纹导向杆,12个M24螺栓孔;","使用寿命":"365天","参照标准":"GB/T 1 ****** 9","备注":"验收标准:***,供应商应无条件进行退,换货处理."}
波纹管补偿器DN4030.00个{"规格型号":"DN40","公称压力":"1.6Mpa","膨胀节形式":"单式轴向型","波纹管形式":"8波纹","膨胀节端部形式":"法兰","10倍设计压力值":"1.6Mpa","公称直径":"40mm","长边":"/","短边":"/","总长度":"150mm","轴向位移量":"20mm","横向位移量":"0","材质":"波纹管：***：***","波形节材质":"304不锈钢","适用温度":"300℃","适用压力":"0.8","特殊要求":"螺栓孔数：***","使用寿命":"180天","参照标准":"GB/T 1 ****** 9","备注":"不合格品处理标准:,到货物资不符合技术要求供货厂家无条件退换货处理,所产生的一切费用由供货厂家承担."}
法兰外漏补偿器DN300-1.61.00个{"规格型号":"DN300-1.6","公称压力":"1.6Mpa","膨胀节形式":"波纹管补偿器","波纹管形式":"金属波纹管","膨胀节端部形式":"法兰连接","10倍设计压力值":"1.6Mpa","公称直径":"300mm","长边":"无","短边":"无","总长度":"340mm","轴向位移量":"40mm","横向位移量":"2mm","材质":"不锈钢0Cr18Ni9","波形节材质":"不锈钢0Cr18Ni9","适用温度":"100℃","适用压力":"1.6Mpa","特殊要求":"两边法兰采用20#钢，12孔；螺纹导向杆采用20#钢；伸缩节：***","使用寿命":"1825天","参照标准":"GB/T 1 ****** 9"}
法兰外漏补偿器DN200-1.62.00个{"规格型号":"DN200-1.6","公称压力":"1.6Mpa","膨胀节形式":"波纹，带螺纹导向杆","波纹管形式":"轴向波纹管","膨胀节端部形式":"法兰连接","10倍设计压力值":"1.6Mpa","公称直径":"DN200","长边":"无","短边":"无","总长度":"150mm","轴向位移量":"30mm","横向位移量":"10mm","材质":"不锈钢（304）","波形节材质":"不锈钢（304）","适用温度":"-20~200℃","适用压力":"1.6MPa","特殊要求":"波节为不锈钢（304）、法兰为20#钢、导流筒材质不锈钢（304）、螺孔中心距：***","使用寿命":"365天","参照标准":"GB/T 1 ****** 9","备注":"到货不合格处理标准:***,由供应商无条件进行更换,退货."}
法兰外漏补偿器DN250~1.62.00个{"规格型号":"DN250~1.6","公称压力":"1.6Mpa","膨胀节形式":"波纹结构","波纹管形式":"轴向","膨胀节端部形式":"法兰","10倍设计压力值":"16Mpa","公称直径":"DN250mm","长边":"100mm","短边":"40mm","总长度":"290mm","轴向位移量":"30mm","横向位移量":"10mm","材质":"法兰盘材质:***","波形节材质":"不锈钢 304","适用温度":"100℃~300℃","适用压力":"1.6Mpa","特殊要求":"到货不合格处理标准:***,由供应商无条件进行更换,退货.","使用寿命":"1000天","参照标准":"GB/T 1 ****** 9"}
矩形波纹补偿器1900*778*2002.00件{"规格型号":"1900*778*200","公称压力":"1.6Mpa","膨胀节形式":"单式轴向式","波纹管形式":"2~3波纹","膨胀节端部形式":"法兰连接","10倍设计压力值":"16Mpa","公称直径":"无","长边":"1900mm","短边":"778mm","总长度":"200mm","轴向位移量":"无","横向位移量":"无","材质":"不锈钢304","波形节材质":"不锈钢304","适用温度":"400℃","适用压力":"1.6Mpa","特殊要求":"内缩量50mm,法兰厚度3mm,法兰孔距详见图片","使用寿命":"365天","参照标准":"GB/T 1 ****** 9","备注":"到货必须满足技术要求若不符合技术要求厂家予以退换货处理，产生费用由供货商承担"}
柔性织物补偿器L=260SJB-7-04-7003.00个{"规格型号":"L=260SJB-7-04-700","公称压力":"12Mpa","膨胀节形式":"软连接","波纹管形式":"无","膨胀节端部形式":"方形","10倍设计压力值":"无","公称直径":"120cm","长边":"120cm","短边":"90cm","总长度":"120cm","轴向位移量":"无","横向位移量":"无","材质":"织物","波形节材质":"无","适用温度":"100℃","适用压力":"10Mpa","特殊要求":"无","使用寿命":"1460天","参照标准":"GB/T 1 ****** 9"}
波纹膨胀节补偿器DN720*450mm2.00个{"规格型号":"DN720*450mm","公称压力":"0.004Mpa","膨胀节形式":"无约束通用型","波纹管形式":"圆形","膨胀节端部形式":"焊接式","10倍设计压力值":"0.04Mpa","公称直径":"720mm","长边":"/","短边":"/","总长度":"450±10mm","轴向位移量":"40mm","横向位移量":"20mm","材质":"连接管及导流套材质16Mn","波形节材质":"不锈钢304","适用温度":"-50～700℃","适用压力":"≤4Kpa","特殊要求":"波纹管层数为2层,每层厚度≥1.2mm;波纹管管坯卷制时,严禁采用环形焊缝;导流内套筒厚度20±0.5mm,应在补偿器上标明介质流动方向,金属补偿器内部(包括导流筒)粘贴由螺栓固定的抗冲击耐磨陶瓷片防磨;如到货不符合技术要求,由供应商无条件进行换货处理","使用寿命":"1460天","参照标准":"GB/T 1 ****** 9"}
波纹膨胀节补偿器DN720*600mm4.00个{"规格型号":"DN720*600mm","公称压力":"0.004Mpa","膨胀节形式":"无约束通用型","波纹管形式":"圆形","膨胀节端部形式":"焊接式","10倍设计压力值":"0.04Mpa","公称直径":"720mm","长边":"/","短边":"/","总长度":"600±10mm","轴向位移量":"40","横向位移量":"20","材质":"连接管及导流套材质16Mn","波形节材质":"304不锈钢","适用温度":"-50~700℃","适用压力":"≤4Kpa","特殊要求":"波纹管层数为2层,每层厚度≥1.2mm;波纹管管坯卷制时,严禁采用环形焊缝;导流内套筒厚度20±0.5mm,应在补偿器上标明介质流动方向,金属补偿器内部(包括导流筒)粘贴由螺栓固定的抗冲击耐磨陶瓷片防磨;如到货不符合技术要求,由供应商无条件进行换货处理","使用寿命":"1460天","参照标准":"GB/T 1 ****** 9"}
双介质波纹管补偿器DN80 双介质10.00个{"规格型号":"DN80 双介质","公称压力":"1.6Mpa","膨胀节形式":"波纹管膨胀节","波纹管形式":"双波纹管外包钢编","膨胀节端部形式":"法兰","10倍设计压力值":"1.6MPa","公称直径":"DN80","长边":"无","短边":"无","总长度":"570mm","轴向位移量":"无","横向位移量":"无","材质":"304不锈钢","波形节材质":"304不锈钢","适用温度":"200℃","适用压力":"0.6MPa","特殊要求":"无","使用寿命":"730天","参照标准":"GB/T 1 ****** 9","备注":"1.双介质波纹管补偿器，管内介质沥青，伴热夹层介质热媒油，介质连通方式为法兰连接，主管DN80法兰安装孔距φ160。伴热法兰DN15，安装孔距φ65。/n2.供货附带配套金属缠绕垫及连接螺栓。/n3.到货与上述要求不符时（但可优于上述要求），供方需免费提供退换货服务。"}
双介质波纹管补偿器DN80 双介质 L4705.00个{"规格型号":"DN80 双介质 L470","公称压力":"1.6Mpa","膨胀节形式":"波纹管膨胀节","波纹管形式":"双波纹管外包钢编","膨胀节端部形式":"法兰","10倍设计压力值":"1.6MPa","公称直径":"DN80","长边":"无","短边":"无","总长度":"470mm","轴向位移量":"无","横向位移量":"无","材质":"304不锈钢","波形节材质":"304不锈钢","适用温度":"200℃","适用压力":"0.6MPa","特殊要求":"无","使用寿命":"730天","参照标准":"GB/T 1 ****** 9","备注":"1.双介质波纹管补偿器，管内介质沥青，伴热夹层介质热媒油，介质连通方式为法兰连接，主管DN80法兰安装孔距φ160。伴热法兰DN15，安装孔距φ65。/n2.供货附带配套金属缠绕垫及连接螺栓。/n3.到货与上述要求不符时（但可优于上述要求），供方需免费提供退换货服务。"}
软连接Ф50*2501.00个{"输送介质":"天然气","规格":"Ф50*250","材质":"304不锈钢","连接方式":"焊接","计量单位":"ITE"}
软连接1220*1500*2001.00个{"规格型号":"1220*1500*200","公称压力":"1.6MPa","长边":"1500mm","短边":"1220mm","总长度":"200mm","材质":"不锈钢框厚度：***-4mm，软连接上下钢框表面衬有硅钛布+高硅氧织物+不锈钢网","适用温度":"500℃","特殊要求":"软连接：***，内层2mm厚高硅氧织物","使用寿命":"1年"}
软连接DN80-166.00个{"规格型号":"DN80-16","公称压力":"1.6MPa","总长度":"135mm","材质":"法兰材质:***","适用温度":"100℃","特殊要求":"采用浸胶尼龙帘子布内外面采用高强度耐老化极性橡胶材料，丁晴橡胶","使用寿命":"1年","参照标准":"GB/T 2 ****** 0"}
软连接DN100/PN16/L=15012.00个{"规格型号":"DN100/PN16/L=150","公称压力":"1.6Mpa","膨胀节形式":"橡胶凸缘","波纹管形式":"无","膨胀节端部形式":"法兰连接","10倍设计压力值":"16","公称直径":"DN100","长边":"140","短边":"110","总长度":"150","轴向位移量":"2","横向位移量":"2","材质":"丁晴橡胶","波形节材质":"无","适用温度":"-30℃-60℃","适用压力":"1.6MP","特殊要求":"无","使用寿命":"1095天","参照标准":"HCRJ 070-1999"}
软连接DN200/L=5206.00个{"规格型号":"DN200/L=520","公称直径":"200mm","公称压力":"1.6Mpa","长度":"520mm","连接件形式":"法兰","材质":"法兰Q235碳钢,波纹管不锈钢304","特殊要求":"无","使用寿命":"720天","计量单位":"ITE","参照标准":"GB/T 1 ****** 9","备注":"验收要求:***,必须进行退还换货."}
软连接DN503.00个{"规格型号":"DN50","公称压力":"0.6Mpa","膨胀节形式":"波纹管膨胀节","波纹管形式":"金属波纹管","膨胀节端部形式":"圆形法兰","10倍设计压力值":"6bar","公称直径":"50mm","长边":"40mm","短边":"40mm","总长度":"300mm","轴向位移量":"50mm","横向位移量":"20mm","材质":"法兰为铸钢","波形节材质":"不锈钢","适用温度":"-20~180℃","适用压力":"0~10bar","特殊要求":"材质必须具有来冲击性,具有一定的强度","使用寿命":"730天","参照标准":"GB/T 1 ****** 8"}
软连接1900*778*2007.00个{"规格型号":"1900*778*200","公称压力":"1.6Mpa","膨胀节形式":"轴向型波纹膨胀节","波纹管形式":"万向横向型","膨胀节端部形式":"法兰连接","10倍设计压力值":"11.3MPa","公称直径":"1900*778","长边":"1900mm","短边":"778mm","总长度":"200mm","轴向位移量":"148mm","横向位移量":"17mm","材质":"法兰外框及固定框材质Q235B,软连接材质外层1mm厚硅钛布内层2mm高硅氧织物+不锈钢网","波形节材质":"1mm厚硅钛布内层2mm高硅氧织物+不锈钢网","适用温度":"500℃","适用压力":"1.6Mpa","特殊要求":"安装尺寸详见图纸","使用寿命":"365天","参照标准":"CB/T ****** 8","备注":"到货验收:***,包装无破损,波纹处无损坏//无裂口//无老化现象,连接法兰处无生锈现象,若出现质量问题无偿退换货."}
挠性连接器 ****** -12/175PSI4.00个{"规格型号":" ****** -12/175PSI","公称压力":"1MPa","膨胀节形式":"金属膨胀节","膨胀节端部形式":"法兰","公称直径":"200","总长度":"294","材质":"碳钢","波形节材质":"304不锈钢","适用温度":"100℃","特殊要求":"一端为分体式法兰，外带一层304钢编","使用寿命":"1年","参照标准":"GB/T 1 ****** 9"}
风机软连接2000mm*1600mm*200mm3.00个{"规格型号":"2000mm*1600mm*200mm","公称压力":"1.6Mpa","长边":"2000mm","短边":"1600mm","轴向位移量":"200mm","材质":"硅橡胶布","特殊要求":"法兰螺孔数目:***,螺丝孔径22mm,法兰厚度10mm,带有配套导流板宽度200mm,厚度10mm,材质碳钢","使用寿命":"365天"}
风机软连接1130mm*1130mm*135mm2.00个{"规格型号":"1130mm*1130mm*135mm","公称压力":"1.6Mpa","长边":"1130mm","短边":"1130mm","轴向位移量":"135mm","材质":"硅橡胶布","特殊要求":"法兰中心孔直径1210mm,法兰螺孔数目:***,螺丝孔径18mm,法兰厚度10mm,带有配套导流板宽度135mm,厚度10mm,材质碳钢","使用寿命":"365天"}
风机软连接φ1267mm*135mm2.00个{"规格型号":"φ1267mm*135mm","公称压力":"1.6Mpa","膨胀节形式":"橡胶风道膨胀节","公称直径":"1267mm","轴向位移量":"135mm","材质":"硅橡胶布","特殊要求":"法兰中心孔直径1337mm,法兰螺孔数目:***,螺丝孔径18mm,法兰厚度8mm,带有配套导流板宽度135mm,厚度8mm,材质碳钢","使用寿命":"365天"}
风机软连接φ2000mm*190mm3.00个{"规格型号":"φ2000mm*190mm","公称压力":"1.6Mpa","膨胀节形式":"橡胶风道膨胀节","公称直径":"2000mm","轴向位移量":"200mm","材质":"硅橡胶布","特殊要求":"法兰中心孔直径2070mm,法兰螺孔数目:***,螺丝孔径18mm,法兰厚度10mm,带有配套导流板宽度200mm,厚度10mm,材质碳钢","使用寿命":"365天"}
橡胶软连接DN15010.00个{"规格型号":"DN150","公称压力":"1.6Mpa","公称直径":"150mm","材质":"橡胶","适用压力":"0-16bar","特殊要求":"软连接带法兰盘","使用寿命":"450天"}
钢铁弹性连接SF-10/DN32/PN162.00个{"规格型号":"SF-10/DN32/PN16","公称压力":"1.6Mpa","公称直径":"32mm","总长度":"135mm","材质":"法兰Q235B镀锌","波形节材质":"不锈钢321","适用温度":"-20~180℃"}
钢铁弹性连接SF-10/DN80/PN162.00个{"规格型号":"SF-10/DN80/PN16","公称压力":"1.6Mpa","公称直径":"80mm","总长度":"175mm","材质":"法兰Q235B镀锌","波形节材质":"不锈钢321","适用温度":"-20~180℃"}
波纹管软连接DN500*1300mm5.00个{"规格型号":"DN500*1300mm","公称直径":"500mm","公称压力":"1.0Mpa","长度":"1300mm","连接件形式":"法兰连接","材质":"304L不锈钢","特殊要求":"法兰孔按照图纸尺寸定制加工","使用寿命":"365天","计量单位":"ITE","参照标准":"GB/T 1 ****** 0","备注":"输送介质工作压力为1.0Mpa；波纹管与法兰连接牢固可靠，材质为304L；波纹管外层套装不锈钢金属编织网；法兰孔按照图纸尺寸定制加工；到货验收:***或者换货,一切损失有供应商承担."}
波纹管软连接DN350*1300mm5.00个{"规格型号":"DN350*1300mm","公称直径":"350mm","公称压力":"1.6Mpa","长度":"1300mm","连接件形式":"法兰连接","材质":"304L不锈钢","特殊要求":"法兰孔按照图纸尺寸定制加工","使用寿命":"365天","计量单位":"ITE","参照标准":"GB/T 1 ****** 0","备注":"输送介质工作压力为1.6Mpa；波纹管与法兰连接牢固可靠，材质为304L；波纹管外层套装不锈钢金属编织网；法兰孔按照图纸尺寸定制加工；到货验收:***或者换货,一切损失有供应商承担."}
伸缩式软连接Ф500*400* ****** 02.00个{"规格型号":"Ф500*400* ****** 0","公称压力":"6KPa","公称直径":"400mm","总长度":"7000mm","材质":"硅胶帆布，骨架为Ф5镀锌钢丝","特殊要求":"至少每间隔400mm安装1个骨架，","使用寿命":"≥6个月"}
不锈钢软连接DN250/PN102.00个{"规格型号":"DN250/PN10","公称压力":"1.0Mpa","膨胀节形式":"法兰连接型","波纹管形式":"无","膨胀节端部形式":"316L不锈钢法兰盘","10倍设计压力值":"25bar","公称直径":"250","长边":"395mm","短边":"302±1mm","总长度":"130±5mm","轴向位移量":"±5mm","横向位移量":"±5mm","材质":"耐油丁腈橡胶","波形节材质":"无","适用温度":"-20℃～+100℃","适用压力":"10bar","特殊要求":"DN250/PN10原件为品牌ELAFLEX,型号:***-G250.10型，请保证尺寸,(BL长度为两件法兰边长度,头部橡胶为弧形,方便碟型截止阀旋转无干涉,请务必注意),","使用寿命":"＞365天","参照标准":"GB/T 2 ****** 0","备注":"DN250/PN10原件为品牌ELAFLEX,型号:***-G250.10型，如国产化或替换其它品牌请保证尺寸,(BL长度为两件法兰边长度,头部橡胶为弧形,方便碟型截止阀旋转无干涉,请务必注意),设备名称:***,设备型号:***,生产厂家:***,进口/国产信息:***,验收标准:***;不合格品处理:***;应立即免费退货或更换合格品,由此所产生的一切费用由供货方承担."}
不锈钢软连接DN150/PN104.00个{"规格型号":"DN150/PN10","公称压力":"10Mpa","公称直径":"150","总长度":"117±2","材质":"304不锈钢","适用温度":"-20~120","特殊要求":"法兰连接、位移方向:***、螺栓连接孔数:***","使用寿命":"365天"}
不锈钢软连接DN350/PN105.00个{"规格型号":"DN350/PN10","公称压力":"1.0MPaMPa"}
不锈钢软连接DN125/PN104.00个{"规格型号":"DN125/PN10","公称压力":"10Mpa","公称直径":"125","总长度":"103±2","材质":"304不锈钢","适用温度":"-20~120","特殊要求":"法兰连接、位移方向:***、螺栓连接孔数:***","使用寿命":"365天"}
法兰钢鞭软连接DN40*500mm16.00根{"规格型号":"DN40*500mm","公称直径":"DN40","公称压力":"1.6Mpa","长度":"500mm","连接件形式":"法兰连接","材质":"软管为304不锈钢，法兰为碳钢Q235B","特殊要求":"一端为活动法兰连接，一端为固定法兰连接","使用寿命":"≥180天","计量单位":"ROO","参照标准":"SH/T ****** 7","备注":"不合格品处理标准:,到货物资不符合技术要求供货厂家无条件退换货处理,所产生的一切费用由供货厂家承担."}
法兰钢鞭软连接DN25*400mm8.00根{"规格型号":"DN25*400mm","公称直径":"25mm","公称压力":"1.6Mpa","长度":"400mm","连接件形式":"法兰连接","材质":"软管为304不锈钢，法兰为碳钢Q235B","特殊要求":"一端为活动法兰连接，一端为固定法兰连接","使用寿命":"≥180天","计量单位":"ROO","参照标准":"SH/T ****** 7","备注":"不合格品处理标准:,到货物资不符合技术要求供货厂家无条件退换货处理,所产生的一切费用由供货厂家承担."}
方形伸缩软连接820*880*270010.00个{"规格型号":"820*880*2700","公称压力":"1.6Mpa","膨胀节形式":"伸缩式","波纹管形式":"无","膨胀节端部形式":"法兰连接","10倍设计压力值":"无","公称直径":"820mm*880mm","长边":"880mm","短边":"820mm","总长度":"2700mm","轴向位移量":"2400mm","横向位移量":"无","材质":"边框:***,支撑框:Φ6.5钢筋.","波形节材质":"涂胶三防布+青稞纸","适用温度":"-70℃~+260℃","适用压力":"1.6Mpa","特殊要求":"钢筋支撑框间距100mm,边框和安装螺钉孔尺寸见图片.软连接最大伸长总长度不低于2700mm.耐高温,耐高压,导热均匀迅速.耐溶剂,耐老化,抗腐蚀,无毒无污染符合环保要求.耐用性强,可反复层压,使用寿命长.具有良好的缓冲性,回弹性好.","使用寿命":"730天","参照标准":"GB/T ****** 4"}
方形伸缩软连接620*480*160/16008.00个{"规格型号":"620*480*160/1600","公称压力":"1.6Mpa","膨胀节形式":"伸缩式","波纹管形式":"无","膨胀节端部形式":"法兰连接","10倍设计压力值":"无","公称直径":"620*480","长边":"620mm","短边":"480mm","总长度":"1600mm","轴向位移量":"无","横向位移量":"无","材质":"边框:***","波形节材质":"涂胶三防布+青稞纸","适用温度":"-70℃~+260℃","适用压力":"1.6Mpa","特殊要求":"耐高温、耐高压、导热均匀迅速:***、耐老化、抗腐蚀、无毒无污染符合环保要求:***、可反复层压、使用寿命长:***、回弹性好","使用寿命":"730天","参照标准":"GB/T ****** 4","备注":"耐温范围:-70℃至+260℃,壁厚1mm,伸缩比1:***：****480,外框:****604,螺钉孔:Φ11,螺钉孔横向间距:***,螺钉孔纵向间距:***,方形伸缩软连接:***:***,方形伸缩软连接:***:***"}
方形伸缩软连接1400*900*22005.00个{"规格型号":"1400*900*2200","公称压力":"1.6Mpa","膨胀节形式":"伸缩式","波纹管形式":"无","膨胀节端部形式":"法兰连接","10倍设计压力值":"无","公称直径":"1400mm*900mm","长边":"1400mm","短边":"900mm","总长度":"2200mm","轴向位移量":"2000mm","横向位移量":"无","材质":"边框:***,支撑框:Φ6.5钢筋.","波形节材质":"涂胶三防布+青稞纸","适用温度":"-70℃~+260℃","适用压力":"1.6Mpa","特殊要求":"钢筋支撑框间距100mm,边框和安装螺钉孔尺寸见图片.软连接最大伸长总长度不低于2200mm.耐高温,耐高压,导热均匀迅速.耐溶剂,耐老化,抗腐蚀,无毒无污染符合环保要求.耐用性强,可反复层压,使用寿命长.具有良好的缓冲性,回弹性好.","使用寿命":"730天","参照标准":"GB/T ****** 4"}
方形伸缩软连接300*500*20005.00个{"规格型号":"300*500*2000","公称压力":"1.6Mpa","膨胀节形式":"伸缩式","波纹管形式":"无","膨胀节端部形式":"法兰连接","10倍设计压力值":"无","公称直径":"300*500","长边":"500mm","短边":"300mm","总长度":"2000mm","轴向位移量":"1800mm","横向位移量":"无","材质":"边框:***,支撑框:Φ6钢筋.","波形节材质":"涂胶三防布+青稞纸","适用温度":"-70℃~+260℃","适用压力":"1.6Mpa","特殊要求":"钢筋支撑框间距200mm,边框和安装螺钉孔尺寸见图片.软连接最大伸长总长度不低于2000mm.耐高温,耐高压,导热均匀迅速.耐溶剂,耐老化,抗腐蚀,无毒无污染符合环保要求.耐用性强,可反复层压,使用寿命长.具有良好的缓冲性,回弹性好.","使用寿命":"730天","参照标准":"GB/T ****** 4"}
方形伸缩软连接800*960*25003.00个{"规格型号":"800*960*2500","公称压力":"1.6Mpa","膨胀节形式":"伸缩式","波纹管形式":"无","膨胀节端部形式":"法兰连接","10倍设计压力值":"无","公称直径":"800*960","长边":"960mm","短边":"800mm","总长度":"2500mm","轴向位移量":"无","横向位移量":"无","材质":"边框:***","波形节材质":"涂胶三防布+青稞纸","适用温度":"-70~240℃","适用压力":"1.6MPa","特殊要求":"耐高温、耐高压、耐老化","使用寿命":"730天","参照标准":"GB/T ****** 4","备注":"伸缩比1:***，壁厚＞1mm，连接法兰外框800*960mm,内框640*800mm，螺丝孔φ12mm，伸展长度2000mm,如所送物品达不到以上要求，厂家无条件调换货"}
膨胀节DN654.00个{"规格型号":"DN65","公称压力":"0.1~40Mpa","膨胀节形式":"两端活法兰连接","波纹管形式":"无","膨胀节端部形式":"碳钢法兰","10倍设计压力值":"40bar","公称直径":"65mm","长边":"无","短边":"无","总长度":"115mm","轴向位移量":"+8~-15mm","横向位移量":"10mm","材质":"橡胶","波形节材质":"橡胶","适用温度":"120℃","适用压力":"0.1~40Mpa","特殊要求":"螺栓孔直径18mm、螺栓孔数量8个。本件为通体件，多种设备均能使用。","使用寿命":"365天","参照标准":"GB/T 2 ****** 0","备注":"到货验收标准：***，橡胶表面光洁、无裂纹、起线及加工损伤等现象，带有产品合格证。如所送物品的规格、材质性能达不到以上技术要求，生产厂家必须无条件退货。"}
膨胀节DN2002.00个{"规格型号":"DN200","公称压力":"1.0Mpa","公称直径":"200mm","总长度":"215","轴向位移量":"30mm以上","横向位移量":"10mm以上","材质":"304不锈钢","波形节材质":"304不锈钢","特殊要求":"一端法兰固定,一端法兰可移动","使用寿命":"365天"}
膨胀节DN50*10510.00个{"规格型号":"DN50*105","公称压力":"1.6Mpa","公称直径":"50","材质":"三元乙丙橡胶","适用温度":"-20~100","使用寿命":"180天"}
膨胀节DN80*1308.00个{"规格型号":"DN80*130","公称压力":"1.6Mpa","公称直径":"DN80","材质":"法兰材质:***、内衬材质:***","适用温度":"-20~100","特殊要求":"带限制杆作为限幅器","使用寿命":"1095天"}
膨胀节DN100*1302.00个{"规格型号":"DN100*130","公称压力":"1.6Mpa","公称直径":"100","材质":"法兰材质:***、内衬材质:***","适用温度":"-20~100","特殊要求":"带限制杆作为限幅器"}
膨胀节DN5005.00个{"规格型号":"DN500","公称压力":"1.6Mpa","膨胀节形式":"套管式伸缩节","波纹管形式":"无","膨胀节端部形式":"法兰连接","10倍设计压力值":"16Mpa","公称直径":"500mm","长边":"无","短边":"无","总长度":"720mm","轴向位移量":"40mm","横向位移量":"2mm","材质":"铸钢","波形节材质":"无","适用温度":"160℃","适用压力":"1.6Mpa","特殊要求":"来货与技术要求不符,供货商应无条件给予更换或退货,产生费用由供货商承担.","使用寿命":"730天","参照标准":"GB/T 1 ****** 9"}
膨胀节15 ****** 509.00个{"规格型号":"15 ****** 50","公称压力":"1Mpa","膨胀节形式":"法兰连接型","波纹管形式":"无","膨胀节端部形式":"法兰盘","10倍设计压力值":"25bar","公称直径":"135mm","长边":"175mm","短边":"175mm","总长度":"120mm","轴向位移量":"±5mm","横向位移量":"±5mm","材质":"钢","波形节材质":"铝合金","适用温度":"100℃~420℃","适用压力":"0.2Mpa","特殊要求":"设备名称:***,设备型号:***,生产厂家:***,进口/国产信息:***","使用寿命":"365天","参照标准":"GB/T 1 ****** 8"}
伸缩节DN80/PN1010.00个{"规格型号":"DN80/PN10","公称压力":"1Mpa","膨胀节形式":"套筒式","波纹管形式":"无","膨胀节端部形式":"法兰连接","10倍设计压力值":"1Mpa","公称直径":"80mm","长边":"无","短边":"无","总长度":"250mm","轴向位移量":"50mm","横向位移量":"3mm","材质":"Ｑ235","波形节材质":"无","适用温度":"80℃","适用压力":"1mpa","特殊要求":"螺纹导向杆采用20#钢","使用寿命":"365天","参照标准":"GB/T 1 ****** 9"}
伸缩节DN2003.00个{"规格型号":"DN200","公称压力":"1.6Mpa","膨胀节形式":"套管式补偿器","波纹管形式":"无","膨胀节端部形式":"法兰连接","10倍设计压力值":"1.6Mpa","公称直径":"200mm","长边":"无","短边":"无","总长度":"300mm","轴向位移量":"40mm","横向位移量":"2mm","材质":"铸钢","波形节材质":"铸钢","适用温度":"80℃","适用压力":"1.6Mpa","特殊要求":"螺纹导向杆采用20#钢","使用寿命":"730天","参照标准":"GB/T 1 ****** 9"}
伸缩节DN300-103.00个{"规格型号":"DN300-10","公称压力":"1.0Mpa","膨胀节形式":"套管式补偿器","波纹管形式":"无","膨胀节端部形式":"法兰连接","10倍设计压力值":"1Mpa","公称直径":"300mm","长边":"无","短边":"无","总长度":"250mm","轴向位移量":"40mm","横向位移量":"2mm","材质":"Ｑ235","波形节材质":"无","适用温度":"100℃","适用压力":"1Mpa","特殊要求":"螺纹导向杆采用20#钢","使用寿命":"730天","参照标准":"GB/T 1 ****** 9"}
伸缩器DN20013.00个{"规格型号":"DN200","公称压力":"0～1.6Mpa","膨胀节形式":"波纹","波纹管形式":"轴向波纹管","膨胀节端部形式":"法兰连接","10倍设计压力值":"1.6Mpa","公称直径":"DN200","长边":"无","短边":"无","总长度":"320mm","轴向位移量":"30mm","横向位移量":"10mm","材质":"不锈钢","波形节材质":"不锈钢","适用温度":"-20~200℃","适用压力":"1.6MPa","特殊要求":"波节为不锈钢（304）、法兰为20#钢、导流筒材质不锈钢（304）、","使用寿命":"365天","参照标准":"GB/T 1 ****** 9","备注":"到货不合格处理标准:***,由供应商无条件进行更换,退货."}
铸钢伸缩器DN150-1610.00个{"规格型号":"DN150-16","公称压力":"1.6Mpa","膨胀节形式":"套管式伸缩节","波纹管形式":"无","膨胀节端部形式":"法兰连接","10倍设计压力值":"1.6Mpa","公称直径":"150mm","长边":"无","短边":"无","总长度":"250mm","轴向位移量":"40mm","横向位移量":"2mm","材质":"Q235","波形节材质":"无","适用温度":"140℃","适用压力":"1.6Mpa","特殊要求":"有水纹密封线，螺纹导向杆采用20#钢","使用寿命":"730天","参照标准":"GB/T 1 ****** 9"}
铸钢伸缩器DN150-107.00个{"规格型号":"DN150-10","公称压力":"1.0Mpa","膨胀节形式":"套管式伸缩节","波纹管形式":"无","膨胀节端部形式":"法兰连接","10倍设计压力值":"1Mpa","公称直径":"150mm","长边":"无","短边":"无","总长度":"250mm","轴向位移量":"40mm","横向位移量":"2mm","材质":"Ｑ235","波形节材质":"无","适用温度":"100℃","适用压力":"1Mpa","特殊要求":"有水纹密封线，螺纹导向杆采用20#钢","使用寿命":"730天","参照标准":"GB/T 1 ****** 9"}
金属膨胀节DN100*125*316L6.00个{"规格型号":"DN100*125*316L","公称压力":"1.6Mpa","特殊要求":"螺栓孔数：***"}
金属膨胀节DN1800/L=1110/膨胀量354.00件{"规格型号":"DN1800/L=1110/膨胀量35","公称压力":"3KPa","轴向位移量":"35mm","材质":"16Mn","波形节材质":"不锈钢304","适用温度":"≤400℃"}
金属膨胀节DN1800/L=1230/膨胀量492.00件{"规格型号":"DN1800/L=1230/膨胀量49","公称压力":"3KPa","轴向位移量":"49mm","材质":"16Mn","波形节材质":"不锈钢304","适用温度":"≤400℃"}
金属膨胀节DN1800/L=1110/膨胀量394.00件{"规格型号":"DN1800/L=1110/膨胀量39","公称压力":"3KPa","轴向位移量":"39mm","材质":"16Mn","波形节材质":"不锈钢304","适用温度":"≤400℃"}
金属膨胀节DN1800/L=1230/膨胀量502.00件{"规格型号":"DN1800/L=1230/膨胀量50","公称压力":"3KPa","轴向位移量":"50mm","材质":"16Mn","波形节材质":"不锈钢304","适用温度":"≤400℃"}
波纹膨胀节DN530*12/L=12002.00件{"规格型号":"DN530*12/L=1200","公称压力":"3KPa","轴向位移量":"200mm","横向位移量":"100mm","材质":"16Mn","波形节材质":"不锈钢304","适用温度":"≤400℃"}
波纹膨胀节DN700*12/L=120018.00件{"规格型号":"DN700*12/L=1200","公称压力":"3KPa","轴向位移量":"100mm","横向位移量":"150mm","材质":"16Mn","波形节材质":"不锈钢304","适用温度":"≤400℃"}
下料口膨胀节DN200*20010.00个{"规格型号":"DN200*200","公称压力":"1Mpa","膨胀节形式":"法兰连接","波纹管形式":"3波纹","膨胀节端部形式":"法兰螺纹连接","10倍设计压力值":"1.6","公称直径":"200mm","长边":"无","短边":"无","总长度":"200mm","轴向位移量":"10mm","横向位移量":"10mm","材质":"不锈钢","波形节材质":"不锈钢304","适用温度":"100℃","适用压力":"1MPa","特殊要求":"带3个均匀分布螺纹导向杆","使用寿命":"730天","参照标准":"GB/T 1 ****** 8","备注":"内衬耐磨板:***,到货材料必须符合技术要求，不符合规定厂家必须无条件退换货物."}
下料口膨胀节DN200*120011.00个{"规格型号":"DN200*1200","公称压力":"1.0Mpa","膨胀节形式":"法兰连接","波纹管形式":"8波纹","膨胀节端部形式":"法兰螺纹连接","10倍设计压力值":"10MPa","公称直径":"200mm","长边":"无","短边":"无","总长度":"1200mm","轴向位移量":"10mm","横向位移量":"10mm","材质":"不锈钢304","波形节材质":"不锈钢304","适用温度":"100℃","适用压力":"1MPa","特殊要求":"带3个均匀分布螺纹导向杆","使用寿命":"730天","参照标准":"GB/T 1 ****** 8","备注":"内衬耐磨板:***,到货材料必须符合技术要求，不符合规定厂家必须无条件退换货物."}
波纹管膨胀节1.6TB 350*4-J3.00件{"规格型号":"1.6TB 350*4-J","公称压力":"1.6Mpa","膨胀节形式":"轴向","波纹管形式":"无加强U型波纹管","膨胀节端部形式":"焊接","10倍设计压力值":"16","公称直径":"350mm","长边":"280mm","短边":"275mm","总长度":"750mm","轴向位移量":"60mm","横向位移量":"±6mm","材质":"Q235","波形节材质":"SUS304","适用温度":"≤300℃","适用压力":"≤1.6MPa","特殊要求":"外径为Φ377mm，厚度为10mm，接口处作10～15°坡口，L=750mm；","使用寿命":"≥1460天","参照标准":"GB/T 3 ****** 8","备注":"零部件供货时提供到货清单+合格证，并提供材质分析报告单；如有特殊使用要求或说明则应在合格证上标明或附带说明书等资料。到货与本技术要求不符，厂家无条件免费退换货。"}
波纹管膨胀节1.6TB 450*4-J3.00件{"规格型号":"1.6TB 450*4-J","公称压力":"1.6Mpa","膨胀节形式":"轴向","波纹管形式":"无加强U型波纹管","膨胀节端部形式":"焊接","10倍设计压力值":"16MPa","公称直径":"450mm","长边":"425mm","短边":"410mm","总长度":"1050mm","轴向位移量":"60mm","横向位移量":"±6mm","材质":"Q235","波形节材质":"SUS304","适用温度":"≤300℃","适用压力":"≤1.6MPa","特殊要求":"外径为Φ480mm，厚度为10mm，接口处作10～15°坡口，L=1050mm；","使用寿命":"≥1460天","参照标准":"GB/T 3 ****** 8","备注":"零部件供货时提供到货清单+合格证，并提供材质分析报告单；如有特殊使用要求或说明则应在合格证上标明或附带说明书等资料。到货与本技术要求不符，厂家无条件免费退换货。"}
不锈钢膨胀节DN1400/PN102.00件{"规格型号":"DN1400/PN10","公称压力":"1MPa","膨胀节形式":"焊接","轴向位移量":"15mm","材质":"304不锈钢","适用温度":"-40～450℃","特殊要求":"壁厚6mm","参照标准":"GB/T 1 ****** 8"}
金属波纹膨胀节DN700/L=12008.00个{"规格型号":"DN700/L=1200","公称压力":"0.4Mpa","膨胀节形式":"无约束型","波纹管形式":"双层","膨胀节端部形式":"焊接式","10倍设计压力值":"4Mpa","公称直径":"700mm","长边":"1200mm","短边":"1200mm","总长度":"1200mm","轴向位移量":"100mm","横向位移量":"200mm","材质":"连接管及导流套材质16MN","波形节材质":"304不锈钢","适用温度":"700℃","适用压力":"≤4Kpa","特殊要求":"无","使用寿命":"1460天","参照标准":"GB/T 1 ****** 9"}

投标厂商资质
注册资金 专业资质
公司业绩
相关认证
其他

您当前为:【游客状态】文中**为隐藏内容，仅对会员开放，后查看完整商机，本网为注册会员提供免费试用服务。
招标热词
补偿器 垃圾处理 绿化 管道 水利 金具 塔吊 消防设备 地铁 作业车 供水工程 土石方 医院 监理 设计 防水工程 排水工程 医疗 软件 输送带 办公家具 阀门 银行 变压器 电缆 工程建筑 交通运输

黑龙江招标网

哈尔滨招标 齐齐哈尔招 鸡西招标网 鹤岗招标网 双鸭山招标 大庆招标网 伊春招标网 佳木斯招标 七台河招标 牡丹江招标 黑河招标网 绥化招标网 大兴安岭招

尊敬的用户，和您一起投标的企业都在关注 “标800服务平台” 哦，最新项目精准匹配推送，下方扫码轻松关注！